Abstract
As a crucial industrial process for the production of bulk and fine chemicals, semi-hydrogenation of alkynes faces the trade-off between activity and selectivity due to undesirable over-hydrogenation. By breaking the energy linear scaling relationships, we report an efficient additive-free WO3-based single-atom Pd catalytic system with a vertical size effect of hydrogen spillover. Hydrogen spillover induced hydrophilic polar layer (HPL) with limited thickness on WO3-based support exhibits unconventional size effect to Pd site, in which over-hydrogenation is greatly suppressed on Pd1 site due to the polar repulsive interaction between HPL and nonpolar C=C bonds, whereas this is invalid for Pd nanoparticles with higher altitudes. By further enhancing the HPL through Mo doping, activated Pd1/MoWO3 achieves recorded performance of 98.4% selectivity and 10200 h−1 activity for semi-hydrogenation of 2-methyl-3-butyn-2-ol, 26-fold increase in activity of Lindlar catalyst. This observed vertical size effect of hydrogen spillover offers broad potential in catalytic performance regulation.
Similar content being viewed by others
Introduction
The semi-hydrogenation of alkynes to alkenes is a crucial and versatile chemical reaction with numerous industrial and synthetic applications, ranging from bulk to fine chemicals1,2. The most widely used catalyst for this reaction is the supported Pd catalyst, which often displays limited selectivity due to side reactions like oligomerization, isomerization, and over-hydrogenation, caused by strong adsorption of alkenes on the Pd site3,4. The strong adsorption of alkyne can also result in reactant-induced poisoning of the catalyst5,6,7,8. The Lindlar catalyst, an industrial benchmark, addresses these issues by poisoning Pd/CaCO3 with lead and quinoline, thus enhancing selectivity. However, its low activity and toxic additives limit its application in modern industry.
Inspired by the Lindlar catalyst, recent studies have shown that various ligands (e.g., polyamines5,9, thiolate10,11, silane12) can create a metal-organic interface to adjust reactant adsorption behaviors. One example is the NanoSelectTM catalysts developed by BASF, which use hexadecyl-2-hydroxyethyl-dimethyl ammonium dihydrogen phosphate (HHDMA) as a ligand, achieving a selectivity (mostly > 95%) for semi-hydrogenation of alkynes without toxic additives13,14,15. However, the ligand’s strong adsorption on Pd restrains its hydrogenation activity. Other approaches include constructing a strong metal-support interaction16,17,18, alloying Pd with inert components (i.e., Bi19, Ga20, In21,22, Zn23,24, Ag25, Au26, Cu27,28, and even subsurface carbon29) or downsizing Pd to single atoms30,31,32 to regulate the electronic structure as d-band center and weaken C=C bond adsorption. Unfortunately, these methods often compromise activity to achieve higher selectivity. The fundamental cause of the activity-selectivity trade-off lies in the overlapping hydrogenation kinetic of C≡C and C=C bonds, leading to the so-called energy linear scaling relationships (LSRs)33,34,35,36. The key to resolving this paradox lies in breaking the LSRs, which remains an underexplored area of research.
Utilizing spillover hydrogen serves as a promising alternative since hydrogen activation and addition processes are separated and occur on the main active site of metal and the secondary active site of support, respectively37,38,39,40,41,42. For instance, dissociated hydrogen that spilled from encapsulated noble metal nanoparticles (NPs) to the support exhibits activity for the hydrogenation of alkynes while remaining inert for the hydrogenation of alkenes37. However, this method suffers from very limited hydrogenation activity compared to noble metal sites like Pd. Considering the non-polar properties of C≡C and C=C, their adsorption strength on the active site can be directly infulenced by the polarity of the surrounding micro-environment. Thus, it is feasible to leverage the mutual repulsion between C≡C/C=C and the active site by increasing the surface polarity to weaken or even inhibit the adsorption of C = C on the noble metal site from a thermodynamic perspective. One desirable option is to construct a hydrophilic polar layer (HPL) composed of a hydroxyl array through hydrogen spillover on reducible metal oxides. This strategy offers the advantage of not significantly altering the intrinsic activity of the metal active sites while improving selectivity, as their electronic structures are not directly regulated. Consequently, it breaks the LSRs, as depicted in Fig. 1a. Furthermore, spillover hydrogen on the support can provide an additional activity pathway. However, to the best of our knowledge, no published reports have discussed this approach. It is worth noting that the thickness of the HPL is limited to the height of the hydroxyl groups. Therefore, this strategy is effective only when the vertical size of the metal site matches the thickness of the HPL and the selectivity regulation by the HPL on the semi-hydrogenation of C≡C should demonstrate a vertical size effect of the metal active sites, as illustrated in Fig. 1b.
In this work, a series of supported Pd catalysts with Pd size ranging from single atom to large particles were synthesized to explore the vertical size effect of hydrogen spillover on the selectivity regulation for semi-hydrogenation of alkynes. As expected, Pd catalysts with various particle sizes on hydrogen spillover-prone supports exhibited a significant enhancement in alkyne semi-hydrogenation activity. However, only the single-atom Pd catalysts, such as Pd1/WO3, demonstrated a remarkable improvement in alkene selectivity following H2 pretreatment, where the vertical size effect of hydrogen spillover was observed. We discovered that hydrogen spillover led to the formation of a hydrophilic polar layer (HPL) comprising a hydroxyl array on the WO3 surface. This HPL influenced the semi-hydrogenation reaction and exhibited sensitivity to metal particle size. In the case of Pd NPs, the limited thickness of the HPL prevented it from affecting the adsorption of C=C bond on the metal surface, resulting in no improvement in selectivity (Fig. 1b). However, the presence of spillover hydrogen at the metal-support interface enhances the reaction activity. On the other hand, for single-atom Pd sites, the thickness of the HPL ensured its repulsive effect on both non-polar C≡C and C=C bonds adsorbed on the single-atom Pd surface. Moreover, the addition of Mo facilitated hydrogen spillover and enhanced the HPL, further improving the catalytic performance. This vertical size effect of the HPL could be extended to other selective hydrogenation reactions, such as p-chloronitrobenzene and nitrostyrene, and represents a novel approach to address the trade-off between activity and selectivity using hydrogen spillover.
Results and discussion
Evidence and effect of hydrogen spillover
To investigate the impact of hydrogen spillover on the semi-hydrogenation of alkynes, we conducted comparative tests using various supports, including reducible (WO3, TiO2, CeO2) and irreducible (Al2O3, SiO2, MgO) supports loaded with ~0.3 wt% uniform Pd nanoparticles (NPs) with an average size of 2.8 nm (Supplementary Figs. 1–3)43. Detailed characterizations are provided in Supplementary Fig. 4–5. The semi-hydrogenation of 2-methyl-3-butyn-2-ol (MBY), a significant process for producing vitamins and spices, was conducted as a probe reaction to evaluate the performance of those Pd-based catalysts before and after hydrogen pretreatment (introducing hydrogen spillover). The results presented in Fig. 2a and b demonstrated that, after hydrogen pretreatment, Pd catalysts supported on reducible supports exhibited a notable improvement in activity, while those with unreducible supports displayed negligible activity enhancement (Supplementary Fig. 6). No detectable variation in selectivity was found among these Pd NPs catalysts, whether activated or not (Supplementary Fig. 7). This difference in activity strongly suggests that hydrogen spillover plays a significant role in the hydrogenation process44. Based on the finding that Pd/WO3 exhibited the most significant catalytic activity increment (4-fold) and relatively great selectivity, we selected WO3 as the support to investigate the underlying mechanism for the observed activity improvement.
Aberration-corrected HAADF-STEM images indicated that the Pd species existed in the form of particles, and no small clusters or single atoms were observed (Supplementary Fig. 8–10). After hydrogen pretreatment, amorphous HxWO3 was observed on the Pd/WO3 surface, with the lattice fringe of WO3 becoming blurred at the edge (Fig. 2c)45. TEM and XRD pattern did not reveal any discernible differences in the bulk phase, suggesting the HxWO3 was mainly formed on the surface (Supplementary Fig. 11, 12). In situ H2 infrared spectroscopy showed that the peaks for stretching vibration of W-OH at 3290 cm−1 emerged and enhanced with increasing hydrogen exposure time (Fig. 2d and Supplementary Fig. 13), while switching the atmosphere from H2 to D2, the signals for the new O-D entities on the support could be spotted easily (Supplementary Fig. 14), which demonstrated the occurrence of hydrogen spillover46,47. Similar results were confirmed by the proportion rise in the hydroxyl groups at 531.5 eV in XPS spectra of O 1 s from 21% to 35% (Fig. 2e), the positive shift of bridging hydroxyl groups at 4.54 ppm, and the occurrence of terminal hydroxyl groups at 1.08 ppm in 1H NMR (Fig. 2f)48,49,50,51. These results indicate that HPL gradually formed during the hydrogen pretreatment process, which is closely related to the improved catalytic performance of Pd/WO3.
Investigation in activity contributions
In order to explore the connection between hydrogenation kinetics and the extent of hydrogen spillover, we conducted tests on the semi-hydrogenation activity of Pd/WO3 under different hydrogen pretreatment durations. As shown in Fig. 3a and Supplementary Fig. 15, the catalytic activity increased gradually with longer activation time, ultimately reaching a steady state with activity 4 times higher than that of the fresh catalyst52. Successive batch experiments exhibited that the activity significantly improved in the second run and remained stable thereafter, indicating that the Pd/WO3 could also be in-situ activated during the hydrogenation without hydrogen pretreatment (Supplementary Fig. 16). Furthermore, the reaction rate of MBY was detected to increase with time on fresh Pd/WO3, with a reaction order of −0.95 (Fig. 3b). The negative reaction order suggests that the excessive adsorption of alkynes induces a competitive behavior, blocking Pd active sites and hindering the activation of H223. As the pretreatment time was extended, the reaction order of MBY gradually reduced to −0.25, suggesting that the HPL formed by hydrogen spillover could efficiently weaken the competitive inhibition of MBY without directly modifying the electronic structure of the active Pd sites (Supplementary Fig. 17), thereby enhancing the activity. In addition, the kinetic isotope effect (KIE) was explored on activated Pd/WO3 (Pd/WO3-H) using D2 instead of H2 (Supplementary Fig. 18). The calculated KIE value (kH/kD = 1.64) indicated that rate-limiting step is MBY hydrogenation rather than H2 activation, further proving that the HPL effectively reduced the poisoning effect of MBY.
We further prepared Pd/WO3 catalysts with highly dispersed Pd atoms as well as Pd NPs of 4.6 and 7.8 nm (Supplementary Figs. 19–22) to investigate the effectiveness of hydrogen-pretreated activation. The atomic dispersion of Pd in Pd1/WO3 was confirmed through extended X-ray absorption fine structure (EXAFS) analysis, which showed a distinct peak of Pd‒O contribution at 1.52 Å and the absence of Pd‒Pd coordination at 2.55 Å (Fig. 3c). Additional characterization results are presented in Supplementary Figs. 23–26 and Supplementary Table 2. All Pd/WO3 catalysts with different Pd ensemble sizes exhibited enhanced activity after hydrogen pretreatment, with smaller Pd ensembles displaying a greater increase in activity (Fig. 3d and Supplementary Fig. 27). Among these, Pd1/WO3-H demonstrated the highest performance with a 6-fold increase in activity.
To gain a deeper understanding of the intrinsic chemical mechanism behind the improvement of catalytic activity of Pd/WO3 via hydrogen spillover, we varied the particle size (single atom, 2.8 nm, 4.6 nm, 7.8 nm) and studied the effect of catalyst loading (0.05–0.30 wt%) on activity (Fig. 3e and Supplementary Fig. 28). The figure revealed a good linear relationship between catalyst loading and conversion rate, but all the correlation lines do not pass through the origin, indicating that the support itself exhibits some activity31,39. Similar conclusions were drawn in the selective poisoning experiments that used CO and Li2SO4 as targeted inhibitors to poison the Pd and support sites of PdNP/WO3 (WO3 supported Pd nanoparticle catalyst), respectively (Supplementary Figs. 29–31)53,54. Additionally, we investigated the reaction rates normalized by Pd loading to distinguish the contribution of Pd sites (Fig. 3f). As the Pd loading increased, the normalized activity tended to remain constant, which indicated that the contribution of support sites weighed more with the lower Pd loading (Supplementary Fig. 32). Based on these findings, we proposed an underlying mechanism for the improved activity by hydrogen spillover on Pd/WO3 (Fig. 3g). Pd sites played a primary role in H2 dissociation and substrate hydrogenation, while WO3 functioned as a medium to transport and store H atoms, forming HxWO3 as a dynamic “hydrogen pool” to participate in the hydrogenation. This dynamic process simultaneously avoided the competitive adsorption of substrates and H2 and accelerated the hydrogenation rate.
Mechanism of HPL in selectivity improvement
Besides its activity, the ability to control selectivity towards alkenes is an even more desirable feature. Surprisingly, the Pd1/WO3 exhibited significantly different selectivity compared to PdNP/WO3, as shown in Fig. 4a and Supplementary Fig. 33a. The selectivity of MBE on fresh Pd1/WO3 declined quickly to 88.9%, while it maintained 95.4% on Pd1/WO3-H. Moreover, negligible improvement in selectivity was observed for PdNP/WO3 with higher altitudes. Subsequently, Pd1/WO3 with varying hydrogen pretreatment times were evaluated and both activity and selectivity gradually increased when extending the hydrogen pretreatment time (Fig. 4b). After full conversion of MBY, MBE hydrogenation was also significantly inhibited on Pd1/WO3-H, resulting in only a slight decrease in selectivity from 95.4% to 84% over 2 h, which was much higher than that of fresh Pd1/WO3 (from 88.5% to 55.5%). As expected, the yield of MBY decreased sharply from 84% to 24% for the Pd NPs counterparts (Supplementary Figs. 33b and 34).
The presented results highlight the significant role of the HPL formed on Pd1/WO3-H in suppressing over-hydrogenation by blocking the Pd site, with this blocking effect being size-sensitive. On one hand, the HPL provides proton shielding through polar incompatibility, preventing the adsorption of non-polar molecules or functional groups like alkynes and alkenes on the catalytic surface. On the other hand, the bond length of W-OH (2.35 Å) suggests a size effect in the vertical surface direction for proton shielding. In the case of Pd1/WO3-H, the Pd site was shielded by the HPL, as the atomic radius of Pd (1.37 Å) is shorter than the bond length of W-OH. Conversely, the surface sites of Pd particles in PdNP/WO3 remain accessible to alkenes for hydrogenation, leading negligible selectivity improvement (Fig. 1b). To support our hypothesis, a series of verified experiments were further conducted.
Contact angle measurements were performed to investigate the change in hydrophilicity of the prepared catalysts55,56. The water contact angle (WCA) of Pd1/WO3 decreased from 42°4′ to 12°24′ as the hydrogen pretreatment time prolonged (Fig. 4c and Supplementary Fig. 35), indicating that the hydrogen treatment made the catalyst surface more hydrophilic and oleophobic42,57. For alkenes, the polar repulsive interaction and the steric effect between hydroxyl groups and alkenes were beneficial to the desorption. An increase in selectivity to MBE with lower WCA was expected (Supplementary Fig. 36). For alkynes, the repulsion reduced the poisoning effect of C≡C, promoting the H2 dissociation and alkyne hydrogenation. Temperature-programmed desorption (TPD) of C2H2 and C2H4 was conducted to elucidate the variations in substrate adsorption on Pd1/WO3 and Pd1/WO3-H. As shown in Fig. 4d, e, C2H2 and C2H4 adsorbed on fresh Pd1/WO3 desorbed at 388 K and 373 K, respectively. The higher desorption temperature and peak intensity of C2H2 indicated its stronger adsorption58,59. After hydrogen pretreatment, C2H4 adsorption became negligible, and the peak of C2H2 desorption shifted to lower temperature (366 K), indicating that HPL could effectively reduce both the adsorption strength of alkyne and alkene through the polar repulsion. Density functional theory (DFT) calculation in Fig. 4f further confirmed that the adsorption energy (Eads) of MBE significantly decreased from −0.68 eV to −0.2 eV after HPL formation, which was weak enough to prevent the re-chemisorption and further hydrogenation of MBE. Simultaneously, the Eads of MBY decreased from −1.21 eV to −0.61 eV, consistent with the weakened poisoning effect. The Eads ratio of MBY to MBE on Pd1/WO3-H was enlarged, also indicating increased MBE selectivity. When examining the adsorption configurations, one can assumed the decrease of Eads for MBY and MBE resulted from the reduced free reaction space above Pd sites.
A plausible reaction mechanism explaining the selectivity promotion on Pd1/WO3 due to the HPL is proposed. Upon H2 pretreatment, the HPL formed through hydrogen spillover on Pd1/WO3-H envelops the single Pd site, offering proton shielding to non-polar functional groups through polar incompatibility. This dynamical repulsion of the as-formed alkenes hinders over-hydrogenation (Fig. 4g). However, due to the size limitation of the hydroxyl group array, the proton shielding effect of HPL is restricted to the sub-nanometer scale in the vertical direction. Consequently, some Pd sites remain accessible to alkenes for subsequent hydrogenation on Pd NPs (Fig. 1b). As a result, the unique selectivity promotion phenomenon with hydrogen spillover is observed only in the case of WO3-supported single-atom Pd catalysts in alkyne semi-hydrogenation. This strategy of constructing HPL around Pd single atom effectively regulates the adsorption of alkenes and alkynes without modifying the electronic structure of the active sites, successfully breaking the linear scaling relationships (LSRs) and hence enhancing selectivity without compromising the intrinsic activity of the catalyst. It should be noted that the effect of the HPL is also applicable to other single atom catalysts with reducible supports where hydrogen spillover occurs. For instance, the hydrogen-pretreated Pd1/TiO2 displayed increased activity and selectivity in MBY semi-hydrogenation, while Pd1/Al2O3 did not show the same effect (Supplementary Fig. 37).
Pd1/MoWO3-catalyzed selective hydrogenation
Subsequent efforts were aimed to enhancing HPL in Pd/WO3 to further improve its catalytic properties. As reported in the previous literature, moderate doping of Mo can reduce the band-gap of WO3, promoting the proton migration and insertion process60,61,62. DFT calculation results depicted in Fig. 5a revealed that the barrier for H2 heterolytic cleavage (TS1) was lower on Pd1/MoWO3 (0.14 eV) compared to Pd1/WO3 (0.25 eV). This indicated that Mo doping could effectively increase H2 activation ability. The same conclusion could be made for the subsequent spillover hydrogen migration63.
A trial was then conducted to dope Mo into WO3 to facilitate hydrogen spillover. Detailed characterizations of Pd1/MoWO3 were shown in Supplementary Fig. 39–45. In-situ IR spectroscopy confirmed the acceleration of hydrogen spillover, as the variation rate of hydroxy peak intensity at 3280 cm−1 increased by a factor of 3.6 on Pd1/MoWO3 (Fig. 5b and Supplementary Fig. 46). WCA measurements also demonstrated that Pd1/MoWO3 was more hydrophilic than Pd1/WO3, indicating a denser HPL and stronger mutual repulsion on Pd1/MoWO3 (Fig. 5c). DFT calculation in Supplementary Fig. 47 further showed that the adsorption energy of MBE and MBY on both Pd1/MoWO3 and Pd1/MoWO3-H significantly decreased, which was further proved by the temperature programmed desorption (TPD) of C2H2 and C2H4 (Supplementary Fig. 48). The adsorption of alkene is dramatically decreased compared to alkyne after the formation of HPL, which greatly improves the selectivity by preventing the over hydrogenation23,64.
As anticipated, fresh Pd1/MoWO3 exhibited 1.5 times higher activity and improved selectivity of MBE, reaching up to 96.1% at >99% conversion, compared to Pd1/WO3 (Supplementary Fig. 49). The induction period was also reduced to 2/3 of the undoped case, indicating a faster hydrogen spillover process (Supplementary Fig. 50). Ultimately, the activated Pd1/MoWO3-H catalyst demonstrated an impressive yield of MBE up to 98.4% and a 26-fold activity (10200 h−1 at 298 K) increase compared to commercial Lindlar catalysts for the semi-hydrogenation of MBY (Supplementary Fig. 51). This performance not only ranks as the best result among reported literatures (much better than the reported catalytic performance), but also declare the arrival of the era of third-generation catalyst development for semi-hydrogenation of alkynes (Fig. 5d and Supplementary Table 3).
Pd1/MoWO3-H with HPL also exhibited excellent stability with the activity and selectivity remaining unchanged in at least 10 subsequent cycles (Fig. 5e and Supplementary Fig. 52). Additionally, Pd1/MoWO3-H demonstrated a wide substrate scope for various alkynes, with the highest selectivity of 99.6% achieved for (Z)-4-octene at full conversion (Fig. 6 and Supplementary Fig. 53). Importantly, a sluggish over-hydrogenation phenomenon was observed after the full conversion of internal alkyne compounds (10a-14a), which is significant for determining the reaction endpoint in industrial applications. To account for industrial reaction conditions, a solvent-free experiment was conducted on Pd1/MoWO3, resulting in an impressive > 99% yield of MBE in 14 h (Supplementary Fig. 54). Notably, the proton shielding effect originated from HPL also improved the selectivity for other hydrogenation reactions, such as p-chloronitrobenzene (95.8% to 98.9%) and 3-nitrostyrene (64.9% to 83.2%) (16a–17a).
In summary, we have developed a WO3-based single-atom Pd catalyst featuring a unique hydrogen spillover size effect, which demonstrates distinguished catalytic performance for additive-free semi-hydrogenation of alkynes. During H2-pretreatment, a hydrophilic polar layer (HPL) forms on the catalyst surface, serving as a hydrogen reservoir that provides an additional activity channel. Furthermore, HPL imparts strong polarity to the micro-environment surrounding the Pd sites. The polar incompatibility between HPL and reactants results in mutual repulsion, weakening the adsorption of nonpolar C=C and C≡C bonds, which finally suppresses the over-hydrogenation and reduces the poisoning effect of alkynes. Due to the height limitation of hydroxyl group array, a vertical size effect of hydrogen spillover is observed on Pd1/WO3 and further enhanced by Mo doping, which exhibits exceptional performance in the selective hydrogenation of MBY and a variety of other substrates, rendering selectivity regulation unavailable for Pd nanoparticle counterparts. The vertical size effect of hydrogen spillover efficiently breaks the linear scaling relationships (LSRs) and is also applicable for other selective hydrogenation reactions, offering more possibilities for selectivity control in challenging reactions, and perhaps more importantly the expansion of the research field on hydrogen spillover.
Methods
Chemicals and materials
Oxide supports, including γ-Al2O3, SiO2, MgO, CeO2, and TiO2 were purchased from rom Aladdin Industrial Corporation and calcined at 500 °C for 1 h. All chemicals were used as purchased without further purification and were commercially available: These chemicals include citric acid (AR), ethylene glycol (AR), acetone (AR), ammonium metatungstate, ((NH4)6H2W12O40· xH2O, AR), ammonium molybdate ((NH4)6Mo7O24· 4H2O, AR), polyvinyl pyrrolidone (MW=58000, AR), palladium chloride (PdCl2, AR), ammonium bicarbonate (NH4HCO3, AR), sodium borohydride (NaBH4, AR), lithium sulfate (Li2SO4, AR), 2-methyl-3-butyn-2-ol (MBY, AR) and other alkyne compounds. Lindlar catalyst (5% palladium on calcium carbonate poisoned by lead) was purchased from Aladdin.
Synthesis of catalysts
The Pd1/WO3 catalysts were synthesized via the wetness impregnation method. Specifically, 300 mg of WO3 was dispersed in 15 ml of deionized water and stirred for 30 min. Simultaneously, 273 mg of NH4HCO3 was dissolved in 20 ml of deionized water, followed by sonication for 30 min. The resulting solutions were then combined and stirred for an additional 30 min, resulting in a flocculent blue precipitate. Next, 100 mg PdCl2 was first dissolved in 10 ml hydrochloric acid solution (0.6 M) to obtain PdCl2 solution. 150 μL PdCl2 hydrochloric acid solution (containing 6 mg·ml−1 Pd) diluted with 8 ml deionized water was added in the WO3 dispersion and constantly stirred for 1 h. The resulting product was separated via centrifugation and subsequently dried under vacuum at 70 °C. Finally, the catalysts were reduced in H2 (flow rate = 50 ml·min−1, heating rate=2 °C·min−1) at 150 °C for 1 h, yielding 0.3% Pd1/WO3. The Pd/MoWO3 catalysts were prepared using the same protocol, with MoWO3 was used as the support material. The loading amount of Pd was regulated by the volume of the precursor solution.
Characterizations
Scanning electron microscopy (SEM) study was performed on a Hitachi SU8010 microscope. An electron paramagnetic resonance (EPR) experiment was conducted on a Bruker A300-10/12. The high-resolution Transmission Electron Microscope (HRTEM) and EDS mapping was conducted on the JEOL JEM-2100F at an acceleration voltage of 200 kV. Spherical aberration corrected Transmission Electron Microscope (HADDF-STEM) was performed on a FEI Titan G280-200 ChemiSTEM at an acceleration voltage of 200 kV. Power X-ray diffraction (XRD) patterns were performed on a Rigaku Ultima IV operating at 40 kV and 20 mA with Cu Kα radiation. The inductively coupled plasma-optical emission spectrometry (ICP-OES) was performed on a Perkin Elmer Optima OES 8000. Raman spectrum was collected on a LabRam HRUV. The X-ray photoelectron spectra (XPS) was obtained on an ESCALAB MARK II spherical analyzer with an aluminum anode (1486.6 eV) X-ray source, and the binding energy was calibrated by the C 1 s peak (284.6 eV). Contact angle measurements were carried on an optical tensiometer (OCA 20, Dataphysics) using the sessile drop method with DI water. Solid state NMR measurements were performed on Bruker Avance III HD 400 MHz spectrometers using 3.2 mm magic-angle spinning probes. The XAFS spectra were recorded at room temperature using a 4-channel Silicon Drift Detector (SDD) Bruker 5040. Pd K-edge extended X-ray absorption fine structure (EXAFS) spectra were recorded in fluorescence mode. Temperature-programmed desorption (TPD) experiments were conducted with a TCD using 10 vol% C2H2 or C2H4 in Ar, respectively. In situ FTIR spectra of H2 adsorbed on solid samples were collected on a Bruker Vector 70.
Catalytic test
The process of selective hydrogenation was carried out in a 50 ml three-necked round bottom flask. Typically, 10 mg of catalyst and 1 mmol of substrate were dispersed in 10 ml of ethanol under constant stirring at 40 °C. A balloon filled with H2 (1 bar) was then connected to the flask and purged for several times to remove any air before the reaction started. Samples were collected at regular intervals using syringe to monitor the reaction progress, and the product distribution was analyzed by a gas chromatography with a flame ionization detector (GC-FID), using octane as an internal standard. The product was further confirmed by gas chromatography-mass spectrometry (GC-MS). To ensure the reproducibility within ±0.5%, conversion and selectivity values were repeatedly measured under the same reaction conditions. For the hydrogen pretreatment experiment, hydrogen was introduced into the system for a certain period before adding the substrate, with all other conditions remaining unchanged.
The reaction rate was calculated using Eq. (1) and the conversion was controlled to be less than 20% to eliminate the effect of reverse reaction.
DFT calculations
Calculations were conducted using periodic, spin-polarized density functional theory (DFT) implemented in the Vienna ab initio program package (VASP), employing the projector augmented wave (PAW) method proposed by Blöchl50 and implemented by Kresse51. A cutoff energy of 400 eV for plane waves was set throughout the calculations, and exchange-correlation functional approximation was treated with PBE functional. Gaussian electron smearing method with σ = 0.05 eV was used. A p (2 × 2) supercell with a 3-layer slab of 144 atoms for WO3 (0 0 2) was modeled, and k-point of 2 × 2 × 1 was used for Brillouin zone sampling during structure optimization. During structural optimization, the bottom layer was fixed at a bulk truncated position, while the top three layers and the adsorbates were allowed to relax fully. The periodic condition was employed along the x and y directions and the vacuum region between the slabs was 15 Å, which was sufficiently large to keep spurious interactions negligible. The geometry optimization was stopped when the force residue on the atom was smaller than 0.02 eV and the energy difference was <10–4 eV. The adsorption and dissociation energies for molecule chemisorption were defined as follows, respectively (Eq. 2)
where Etota is the total energy after a molecule adsorption on the catalyst, Elsa is the energy of the clean catalyst alone, and Emol is the energy of the molecule in the gas phase. Transition states (TS) were obtained using the nudged elastic band (NEB) method with a force convergence criterion of 0.05 eV/Å.
Data availability
The data that support the findings of this study can be found in the manuscript and Supplementary information, or are available from the corresponding author upon request.
References
Wang, Z. et al. Fundamental aspects of alkyne semi-hydrogenation over heterogeneous catalysts. Nano Res. 15, 10044–10062 (2022).
Borodziński, A. & Bond, G. C. Selective hydrogenation of ethyne in ethene‐rich streams on palladium catalysts. Part 1. Effect of changes to the catalyst during reaction. Catal. Rev. 48, 91–144 (2006).
Bond, G. C., Webb, G., Wells, P. B. & Winterbottom, J. M. Patterns of behavior in catalysis by metals. J. Catal. 1, 74–84 (1962).
Liu, K. et al. Atomic overlayer of permeable microporous cuprous oxide on palladium promotes hydrogenation catalysis. Nat. Commun. 13, 2597 (2022).
Luo, Q. et al. Dynamic modification of palladium catalysts with chain alkylamines for the selective hydrogenation of alkynes. ACS Appl. Mater. Interfaces 13, 31775–31784 (2021).
Yao, S. et al. Atomic-layered Au clusters on α-MoC as catalysts for the low-temperature water-gas shift reaction. Science 357, 389–393 (2017).
Mittendorfer, F., Thomazeau, C., Raybaud, P. & Toulhoat, H. Adsorption of unsaturated hydrocarbons on Pd(111) and Pt(111): A DFT study. J. Phys. Chem. B 107, 12287–12295 (2003).
Luneau, M. et al. Achieving high selectivity for alkyne hydrogenation at high conversions with compositionally optimized PdAu nanoparticle catalysts in raspberry colloid-templated SiO2. ACS Catal. 10, 441–450 (2019).
Long, W., Brunelli, N. A., Didas, S. A., Ping, E. W. & Jones, C. W. Aminopolymer–silica composite-supported Pd catalysts for selective hydrogenation of alkynes. ACS Catal. 3, 1700–1708 (2013).
Zhao, X. et al. Thiol treatment creates selective palladium catalysts for semihydrogenation of internal alkynes. Chem 4, 1080–1091 (2018).
Yoshii, T., Umemoto, D., Kuwahara, Y., Mori, K. & Yamashita, H. Engineering of surface environment of Pd nanoparticle catalysts on carbon support with pyrene–thiol ligands for semihydrogenation of alkynes. ACS Appl. Mater. Interfaces 11, 37708–37719 (2019).
Da Silva, F. P., Fiorio, J. L. & Rossi, L. M. Tuning the catalytic activity and selectivity of Pd nanoparticles using ligand-modified supports and surfaces. ACS Omega 2, 6014–6022 (2017).
Witte, P. T. et al. BASF NanoSelect™ technology: Innovative supported Pd- and Pt-based catalysts for selective hydrogenation reactions. Top. Catal. 55, 505–511 (2012).
Büchele, S. et al. Carrier-induced modification of palladium nanoparticles on porous boron nitride for alkyne semi-hydrogenation. Angew. Chem. Int. Ed. 59, 19639–19644 (2020).
Vile, G., Almora-Barrios, N., Mitchell, S., Lopez, N. & Perez-Ramirez, J. From the Lindlar catalyst to supported ligand-modified palladium nanoparticles: selectivity patterns and accessibility constraints in the continuous-flow three-phase hydrogenation of acetylenic compounds. Chemistry 20, 5926–5937 (2014).
Mao, S. et al. Tuning the catalytic performance for the semi-hydrogenation of alkynols by selectively poisoning the active sites of Pd catalysts. Green. Chem. 21, 4143–4151 (2019).
Hyun, K. et al. Tailoring a dynamic metal–polymer interaction to improve catalyst selectivity and longevity in hydrogenation. Angew. Chem. Int. Ed. 60, 12482–12489 (2021).
Lee, S. et al. Dynamic metal-polymer interaction for the design of chemoselective and long-lived hydrogenation catalysts. Sci. Adv. 6, eabb7369 (2020).
Lou, B. et al. Highly selective acetylene semihydrogenation catalyst with an operation window exceeding 150°C. ACS Catal. 11, 6073–6080 (2021).
Armbrüster, M. et al. Pd−Ga intermetallic compounds as highly selective semihydrogenation catalysts. J. Am. Chem. Soc. 132, 14745–14747 (2010).
Feng, Q. et al. Isolated single-atom Pd sites in intermetallic nanostructures: High catalytic selectivity for semihydrogenation of alkynes. J. Am. Chem. Soc. 139, 7294–7301 (2017).
Markov, P. V. et al. Intermetallic PdIn/Al2O3 catalysts with isolated single-atom Pd sites for one-pot hydrogenation of diphenylacetylene into trans-stilbene. Mendeleev Commun. 30, 468–471 (2020).
Shen, L. et al. PdZn intermetallic on a CN@ZnO hybrid as an efficient catalyst for the semihydrogenation of alkynols. J. Catal. 350, 13–20 (2017).
Zhou, H. et al. PdZn intermetallic nanostructure with Pd–Zn–Pd ensembles for highly active and chemoselective semi-hydrogenation of acetylene. ACS Catal. 6, 1054–1061 (2016).
Glyzdova, D. V. et al. Liquid-phase acetylene hydrogenation over Ag-modified Pd/Sibunit catalysts: Effect of Pd to Ag molar ratio. Appl. Catal. A: Gen. 600, 117627 (2020).
Luneau, M. et al. Achieving high selectivity for alkyne hydrogenation at high conversions with compositionally optimized PdAu nanoparticle catalysts in raspberry colloid-templated SiO2. ACS Catal. 10, 441–450 (2020).
Pei, G. et al. Performance of Cu-alloyed Pd single-atom catalyst for semihydrogenation of acetylene under simulated front-end conditions. ACS Catal. 7, 1491–1500 (2017).
Ball, M. R. et al. AgPd and CuPd catalysts for selective hydrogenation of acetylene. ACS Catal. 10, 8567–8581 (2020).
Guo, R. et al. PdCx nanocrystals with tunable compositions for alkyne semihydrogenation. J. Mater. Chem. A 7, 4714–4720 (2019).
Kyriakou, G. et al. Isolated metal atom geometries as a strategy for selective heterogeneous hydrogenations. Science 335, 1209–1212 (2012).
Jiang, L. et al. Facet engineering accelerates spillover hydrogenation on highly diluted metal nanocatalysts. Nat. Nanotechnol. 15, 848–853 (2020).
van der Hoeven, J. E. S. et al. Unraveling 1-hexene hydrogenation over dilute Pd-in-Au alloys. J. Phys. Chem. C. 126, 15710–15723 (2022).
Yang, Y. et al. Breaking scaling relationships in alkynol semi-hydrogenation by manipulating interstitial atoms in Pd with d-electron gain. Nat. Commun. 13, 2754 (2022).
Studt, F. et al. On the role of surface modifications of Palladium catalysts in the selective hydrogenation of acetylene. Angew. Chem. Int. Ed. 47, 9299–9302 (2008).
Studt, F. et al. Identification of non-precious metal alloy catalysts for selective hydrogenation of acetylene. Science 320, 1320–1322 (2008).
Xin, H., Vojvodic, A., Voss, J., Nørskov, J. K. & Abild-Pedersen, F. Effects of d-band shape on the surface reactivity of transition-metal alloys. Phys. Rev. B 89, 115114 (2014).
Wang, S. et al. Activation and spillover of hydrogen on sub-1 nm palladium nanoclusters confined within sodalite zeolite for the semi-hydrogenation of alkynes. Angew. Chem. Int. Ed. 58, 7668–7672 (2019).
Zhao, L. et al. A magnetically separable Pd single-atom catalyst for efficient selective hydrogenation of phenylacetylene. Adv. Mater. 34, e2110455 (2022).
Zhang, Y. et al. Heterogeneous hydrogenation with hydrogen Spillover enabled by nitrogen vacancies on boron nitride-supported Pd nanoparticles. Angew. Chem. Int. Ed. 62, e202217191 (2023).
Zhang, S., Xia, Z., Zou, Y., Zhang, M. & Qu, Y. Spatial intimacy of binary active-sites for selective sequential hydrogenation-condensation of nitriles into secondary imines. Nat. Commun. 12, 3382 (2021).
Prins, R. Hydrogen spillover. facts and fiction. Chem. Rev. 112, 2714–2738 (2012).
Hulsey, M. J., Fung, V., Hou, X., Wu, J. & Yan, N. Hydrogen spillover and its relation to hydrogenation: Observations on structurally defined single-atom sites. Angew. Chem. Int. Ed. 61, e202208237 (2022).
Wang, Y. et al. One-pot synthesis of single-crystal palladium nanoparticles with controllable sizes for applications in catalysis and biomedicine. ACS Appl. Nano Mater. 2, 4605–4612 (2019).
Karim, W. et al. Catalyst support effects on hydrogen spillover. Nature 541, 68–71 (2017).
Chen, J. et al. Reversible hydrogen spillover in Ru-WO3-x enhances hydrogen evolution activity in neutral pH water splitting. Nat. Commun. 13, 5382 (2022).
Chauvin, J., Thomas, K., Clet, G. & Houalla, M. Comparative influence of surface tungstate species and bulk amorphous WO3 particles on the acidity and catalytic activity of tungsten oxide supported on silica. J. Phys. Chem. C. 119, 12345–12355 (2015).
Daniel, M. F., Desbat, B., Lassegues, J. C., Gerand, B. & Figlarz, M. Infrared and Raman study of WO3 tungsten trioxides and WO3, xH2O tungsten trioxide tydrates. J. Solid State Chem. 67, 235–247 (1987).
Lunk, H. J., Salmen, M. & Heidemann, D. Solid-state 1H NMR studies of different tungsten blue oxides and related substances. Int. J. Refract. Met. H. 16, 23–30 (1998).
Xu, J. et al. Acidity of mesoporous MoOx/ZrO2 and WOx/ZrO2 materials: A combined solid-state NMR and theoretical calculation study. J. Phys. Chem. B 110, 10662–10671 (2006).
Zhu, H., Yang, Q., Liu, D., Du, Y. & Zou, Z. Direct electrochemical protonation of metal oxide particles. J. Am. Chem. Soc. 143, 9236–9243 (2021).
Zheng, X. et al. Tailoring a local acid-like microenvironment for efficient neutral hydrogen evolution. Nat. Commun. 14, 4209 (2023).
Li, P. et al. Effect of hydrogen spillover on the surface of tungsten oxide on hydrogenation of cyclohexene and N-propylcarbazole. Int. J. Hydrog. Energy 46, 3945–3953 (2021).
Pfriem, N. et al. Impact of the local concentration of hydronium ions at tungstate surfaces for acid-catalyzed alcohol dehydration. J. Am. Chem. Soc. 143, 20133–20143 (2021).
Marcinkowski, M. D. et al. Controlling a spillover pathway with the molecular cork effect. Nat. Mater. 12, 523–528 (2013).
Peng, Y. et al. Molecular-level insight into how hydroxyl groups boost catalytic activity in CO2 hydrogenation into methanol. Chem 4, 613–625 (2018).
Zhang, M. et al. Modifying interface of carbon support-stimulated hydrogen spillover for selective hydrogenation. J. Phys. Chem. C. 126, 16682–16689 (2022).
Vanyorek, L. et al. Nitrogen-doped bamboo-shaped carbon nanotube supported catalysts for heterogeneous hydrogenation. The effect of surface polarity. React. Kinet. Mech. Catal. 125, 37–46 (2018).
Cao, Y. et al. Adsorption site regulation to guide atomic design of Ni-Ga catalysts for acetylene semi-hydrogenation. Angew. Chem. Int. Ed. 59, 11647–11652 (2020).
Liu, F. et al. Integration of bimetallic electronic synergy with oxide site isolation improves the selective hydrogenation of acetylene. Angew. Chem. Int. Ed. 60, 19324–19330 (2021).
Dickens, P. G., Kay, S. A., Crouch-Baker, S. & Claridge, D. A. Thermochemistry of the hydrogen insertion compounds formed by the molybdic and tungstic acids HxMO3·nH2O (M = Mo, n = 1; M = W, n = 1,2). Solid State Ion. 23, 9–14 (1987).
Wang, H., Zhang, L., Wang, K., Sun, X. & Wang, W. Enhanced photocatalytic CO2 reduction to methane over WO3·0.33H2O via Mo doping. Appl. Catal. B Environ. 243, 771–779 (2019).
Zhong, X. et al. Mo doping induced more active sites in urchin-like W18O49 nanostructure with remarkably enhanced performance for hydrogen evolution reaction. Adv. Func. Mater. 26, 5778–5786 (2016).
Xi, Y., Zhang, Q. & Cheng, H. Mechanism of hydrogen spillover on WO3 (001) and formation of HxWO3 (x = 0.125, 0.25, 0.375, and 0.5). J. Phys. Chem. C. 118, 494–501 (2013).
Cherkasov, N., Murzin, D. Y., Catlow, C. R. A. & Chutia, A. Selectivity of the Lindlar catalyst in alkyne semi-hydrogenation: a direct liquid-phase adsorption study. Catal. Sci. Technol. 11, 6205–6216 (2019).
Acknowledgements
Financial support from the National Key R&D Program of China (2021YFB3801600), the National Natural Science Foundation of China (22325204), and the “Pioneer” and “Leading Goose” R&D Program of Zhejiang (2023C01108 & 2022C01218 & 2022C01151) are greatly appreciated.
Author information
Authors and Affiliations
Contributions
J.X. performed the catalyst preparation, characterization, catalytic tests and calculations. Q.L., Y.L., and H. N. participated in the catalyst preparation and characterizations. Q.L., H.N., and B.L. provided helpful discussions. S.M. and Y.W. designed this study and analysed the data. J.X., S.M. and Y.W. wrote the manuscript. Y.W. supervised the project. All authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Antonio Leyva-Pérez, and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Xiong, J., Mao, S., Luo, Q. et al. Mediating trade-off between activity and selectivity in alkynes semi-hydrogenation via a hydrophilic polar layer. Nat Commun 15, 1228 (2024). https://doi.org/10.1038/s41467-024-45104-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-45104-6
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.