Abstract
Manganese oxides are ubiquitous marine minerals which are redox sensitive. As major components of manganese nodules found on the ocean floor, birnessite and buserite have been known to be two distinct water-containing minerals with manganese octahedral interlayer separations of ~7 Å and ~10 Å, respectively. We show here that buserite is a super-hydrated birnessite formed near 5 km depth conditions. As one of the most hydrous minerals containing ca. 34.5 wt. % water, super-hydrated birnessite, i.e., buserite, remains stable up to ca. 70 km depth conditions, where it transforms into manganite by releasing ca. 24.3 wt. % water. Subsequent transformations to hausmannite and pyrochroite occur near 100 km and 120 km depths, respectively, concomitant with a progressive reduction of Mn4+ to Mn2+. Our work forwards an abiotic geochemical cycle of manganese minerals in subduction and/or other aqueous terrestrial environments, with implications for water storage and cycling, and the redox capacity of the region.
Similar content being viewed by others
Introduction
Manganese (Mn) is the 3rd most abundant transition metal in the Earth’s crust1 and highly sensitive to redox processes indicative of specific aqueous environments2,3. While Earth’s crust has an average Mn abundance of 0.019 mol/kg4, concentrated Mn exists in the form of oxide nodules in oceanic sediments, which are found at almost all depths and latitude2. More than 30 different phases of Mn oxide/hydroxide minerals are known to date2 with the most dominant minerals being hydrogenetic vernadite (δ-MnO2), todorokite ((Ca,Na,K)x(Mn4+,Mn3+)6O12 ∙ H2O), buserite (Na0.54Mn2O4 ∙ 5.6(1)H2O) and birnessite (Na0.54Mn2O4 ∙ 1.5(1)H2O)2,5. The latter two are the major Mn oxide phases in diagenetic nodules, which account for ~60% of the chemical inventory of the Clarion Clipperton Zone nodules in the Pacific Ocean6,7 and contain billions of tons of other transition metals (Ni, Cu, Co, Li, Mo, Zr), as well as rare earth metals5,8. Although both phases are composed of the MnO6 octahedral layers but with different amounts of intercalated water molecules, their paragenetic relationship and relative stabilities have not been established yet, especially under the deep ocean and/or shallow terrestrial environments.
Compared to the Earth’s terrestrial environments, Martian basalts contain a higher MnO content of ~0.4 weight-% (wt. %)9. Recent observations from the Curiosity rover reports even 1–2 orders of magnitude higher concentrations of Mn in some rocks and emphasize the role of Mn minerals to be used as proxies to understand the evolution of the planet’s past aqueous environments10,11. Furthermore, the observation of dark Mn-rich rock surfaces is consistent with the presence of Mn oxide phases like birnessite12. There is strong evidence that such hydrous Mn oxides could have formed by recurring processes of strongly oxidizing conditions during past aqueous periods13.
In parallel to the diverse oxidation environments on the terrestrial surface, sub-surface regions are also controlled by spatial and secular variations of oxygen fugacity depending on the input and/or fractionation of oxidized sources. For example, magmas generated in the subducting arcs are typically more oxidized than those from mid-ocean ridge basalts14. Redox-sensitive elements with sufficient abundance in the mantle lithologies, such as Fe, H, C, and S, have been extensively studied to understand their geochemical cycle and influence on the redox state of the region15. Although Mn is ubiquitous in oceanic sediments and uniquely sensitive to high potential oxidants16, its redox cycle and role in the subsurface terrestrial environment, especially in the aqueous region where subducting fluid exists and interacts with an overriding mantle wedge, has not yet been explored. Although limited, previous studies suggested the hydrothermal origin of Mn found in the ridge or back-arc basin17,18 to be related to the subduction process18,19,20, as well as sedimentary Mn oxides to play a role in the forearc21 and in the arc regions22 based on the observed high ε205Tl (Thallium) values. Furthermore, Mn ores found in the accretionary belts along the Japan trench point to their origin from manganese nodules in the deep sea23, indicating subduction-related cycling of various Mn minerals.
In order to understand the stabilities and phase relationships of manganese oxide minerals under aqueous sub-surface environments, we have investigated the structural changes of birnessite in water at moderate pressures and temperatures up to ca. 4.37(1) GPa and 525(3) °C, thereby following a cold subduction geotherm24. We have observed super-hydration of birnessite to buserite at 0.19(2) GPa, equivalent to conditions found near 5 km depth, and subsequent transformations of buserite first to manganite at 2.33(1) GPa and 188(6) °C, which are conditions found near 70 km depth, then to hausmannite at 3.09(2) GPa and 314(3) °C, i.e., conditions found at 100 km depth, and then to pyrochroite at 3.88(1) GPa and 396(4) °C, i.e., conditions found near 120 km depth. During the course of the successive pressure and temperature-dependent transformations, a progressive reduction of Mn4+ to Mn2+ occurs. Our observation sheds new light into the redox-related cycling of manganese oxide minerals and their impact on water transport and geochemistry in the aqueous sub-surface environments.
Results and Discussion
Super-hydration of birnessite at shallow depths and its relationship to buserite
The layered structure of birnessite is made of sheets of edge-sharing MnO6 octahedra separated by ~7 Å. Between these sheets water molecules and exchangeable alkaline and alkali-earth cations are located25,26,27. On the other hand, buserite with a ~10 Å interlayer spacing is known to be stable only under aqueous conditions28,29,30 and dehydrates into birnessite when present in a low humidity environment25. Although certain synthetic cation forms of buserite are reported to have two layers of water31,32, no established structural model exists for buserite.
In-situ synchrotron X-ray powder diffraction (XRD) experiments were performed on synthetic birnessite (Na0.54Mn2O4 ∙ 1.5(1)H2O) in water using a resistively-heated diamond-anvil cell (RH-DAC) to follow the subduction geotherm model W1300 of the Tonga trench24 where Mn-abundant oceanic sediments18,22 in the Penrhyn Basin subduct5. Upon contact with water at ambient pressure, a shoulder peak appears at the low-angle side of the initial ~7 Å (001) X-ray diffraction peak, which is likely due to an increased turbostratic stacking disorder of the MnO2 layers33. Upon increase of pressure from 0.07(2) to 0.19(2) GPa, a new X-ray diffraction peak near ~10 Å d-spacing starts to form with a concomitant decrease in the intensity of the initial ~7 Å d-spacing (Fig. 1). At 0.42(2) GPa, the newly formed ~10 Å phase becomes dominant to the initial ~7 Å phase and persists up to 1.46(10) GPa at room temperature. The ~10 Å phase is recovered after pressure release when immersed in water. It transforms back to the initial ~7 Å phase, i.e., in a low humidity environment (Fig. 1b). The XRD pattern of the newly formed ~10 Å phase is indexed as a birnessite-related phase with the c-axis expanded by ca. 41.9 %, resulting in a volume expansion by ca. 42.9 % (Fig. 2 and Supplementary Table 1).
The structural models of the original birnessite and its expanded phase were refined using the Rietveld method of XRD data measured at ambient conditions and at 1.30(10) GPa, respectively. In the case of birnessite, a layer of statistically disordered Na+ cations and water molecules are located halfway between the MnO6 layers with an interlayer spacing of ~7 Å (Fig. 3), which is in accordance to the previously established model23. The Na+ content was fixed to 0.54 per unit cell, as determined by the X-ray photoelectron spectroscopy (XPS) analysis, which led to the refined chemical formula of Na0.54Mn2O4 ∙ 1.5(1)H2O (Supplementary Table 2). The refined water content of 1.5(1) H2O per unit cell is also in agreement with 1.62(1) H2O per unit cell obtained from the thermogravimetric analysis (TGA) (Supplementary Fig. 1). In the case of the expanded birnessite, Difference-Fourier analysis revealed two crystallographically distinct interlayer sites: the OW1 site in the middle of the layers and the OW2 site sandwiching the middle OW1 layer. The OW1 site was assumed to be occupied by statistically disordered Na+ cations and water molecules, as observed in the structural model of the original birnessite at ambient conditions. The OW2 site was then modeled using an oxygen atom of the water molecule, which showed near full occupancy and hence was fixed to unity. This led to the refined chemical formula of the expanded birnessite to be Na0.54Mn2O4 ∙ 5.6(1)H2O (Fig. 3 and Supplementary Table 2), a super-hydrated phase that is about 3.7 times more hydrated than the original birnessite, placing it among the most hydrated known minerals with a water wt. % of 34.5. This is higher than the 29 wt. % of H2O in the super-hydrated kaolinite34 and even rivals to the 34.7 wt. % of OH in gibbsite (Al(OH)3)35. Based on the structural and compositional characteristics, we consider the super-hydrated birnessite to be buserite and have thus established its paragenetic relationship to natural birnessite.
Successive structural transformations of buserite at deeper depths
The pressure where super-hydrated birnessite, i.e., buserite, starts to form, i.e., 0.19(2) GPa, corresponds to about 5 km depth along the cold subduction geotherm. Buserite, carrying ca. 34.5 wt.% water, remains stable upon increase in pressure and temperature to ca. 2.33(2) GPa and 188(6) °C, conditions found at ca. 70 km depth, where it transforms to manganite (ideally, Mn3+O(OH)) (Fig. 1a and Supplementary Fig. 2). Further increases in pressure and temperature lead to successive transformations from manganite to hausmannite (ideally, Mn2+ Mn3+2O4) at ca. 3.09(2) GPa and 314(3) °C, i.e., found near 100 km depth, and then to pyrochroite (ideally, Mn2+(OH)2) at ca. 3.88(1) GPa and 396(4) °C, i.e., conditions found near 120 km depth along the cold subduction geotherm (Figs. 1a, 3, 4 and Supplementary Fig. 2).
The structures of manganite, hausmannite, and pyrochroite have also been confirmed by the Rietveld refinements (Fig. 3 and Supplementary Tables 2–3). The crystalline quality and long-range order observed in these phases are remarkable, indicating no pressure-induced structural or chemical disorder (Fig. 1a). Unlike the super-hydration of birnessite to buserite, the transformation from buserite to manganite is reconstructive, i.e., irreversible, from the viewpoints of both structural and chemical changes in the connectivity of manganese oxide/hydroxide octahedral units and the release of Na+ cations and water molecules into the surroundings. The latter has been confirmed by micro X-ray fluorescence (XRF) elemental mapping of the recovered manganite sample formed at 2.29(10) GPa and 200 °C, which revealed substantial Na distribution around the gasket rims while Mn is uniformly distributed within the sample region (Supplementary Fig. 3).
Interestingly, the depth-dependent transformations from buserite to manganite, hausmannite, and pyrochroite are accompanied by a progressive reduction of Mn4+ to Mn2+. We have confirmed the sequential Mn reduction by measuring the oxidation states of respective recovered samples using XPS (Supplementary Figs. 4 and 5). For the original birnessite sample, the Mn4+ and Mn3+ contents are refined to ca. 86(11)% and 14(11)%, respectively, which are close to the previously reported values of 89.8% (Mn4+) and 10.2 % (Mn3+) in a triclinic Na-birnessite36 (Supplementary Figs. 4 and 5). Such a distribution of oxidation states would be upheld during the super-hydration of birnessite to buserite as it is mainly a water intercalation. In the recovered manganite sample, XPS shows the existence of only Mn3+, suggesting a selective reduction of Mn4+ in buserite during its transition to manganite (Supplementary Figs. 4 and 5). Hausmannite possesses a spinel structure with Mn2+ in the tetrahedral and Mn3+ in the octahedral sites in a 1:2 molar ratio (Fig. 3). Our XPS results confirm such an oxidation state for manganese with ca. 28(5)% for Mn2+ and 72(5)% for Mn3+, revealing a partial reduction of Mn3+ to Mn2+ during the reconstructive phase transition from manganite to hausmannite (Supplementary Figs. 4 and 5). On the other hand, pyrochroite adopts a CdI2-type structure with Mn2+(OH)6 octahedral sheets stacked along the c-axis (Fig. 3). Our XPS analyses show the existence of only Mn2+ in the recovered pyrochroite sample, suggesting complete reduction of Mn3+ to Mn2+ occurred during the transition from hausmannite to pyrochroite (Supplementary Figs. 4 and 5).
To verity the XPS analyses, bond valance sums (BVS) were calculated based on the derived structural models37. The presence of structural hydroxyl groups in manganite is corroborated by the significantly lower BVS of 1.26 and 1.38 for the two refined oxygen positions in the model (Supplementary Table 2). On the other hand, the separation of Mn2+ and Mn3+ sites in hausmannite results in different BVS values of 1.90 for the tetrahedral Mn2+ and 3.29 for the octahedral Mn3+ cations (Supplementary Table 2). For pyrochroite, reduction of the remaining Mn3+ to Mn2+ can be verified by its low BVS value of 1.69 (Supplementary Table 2). The BVS value of 2.12 for oxygen in hausmannite confirms the phase as an oxide, whereas significantly lower values of oxygen BVS’s are found in manganite and pyrochroite, in which a half and all of the oxygen anions exist as hydroxyl groups, respectively (Supplementary Table 2). In addition, the recovered manganite, hausmannite, and pyrochroite samples, when imaged by SEM, show different crystal morphologies, representing respective crystallo-chemical characteristics (Supplementary Fig. 4).
To gain insights into the stabilities of the manganese oxide phases formed along the cold subduction geotherm, pressure-volume data measured ex-situ at room temperature were fitted using the 2nd order Birch-Murgnahan equation of states38. Buserite is found to be about twice as compressible than the original birnessite: i.e., bulk modulus, K0, of birnessite is 66(7) GPa whereas K0 of buserite is 32(2) GPa (Fig. 2), which is comparable to that of NaCl-B239. Such a compressible buserite then transforms into successively denser phases, namely manganite and hausmannite. Although limited in the pressure range, the derived bulk modulus of manganite is 100(3) GPa, which is ca. three times less compressible than buserite. Hausmannite, with a derived bulk modulus of 168(1) GPa, is identified as the least compressible and most dense phase in the transformation sequence observed in our study (Fig. 2 and Supplementary Table 4). Interestingly, the further transformation of hausmannite at conditions found near depths of 120 km led to the formation of the less dense and more compressible mineral, pyrochroite, with a derived bulk modulus of 37(4) GPa and a calculated density of 3.46 g/cm3, which are similar to the values found in buserite (Fig. 2 and Supplementary Table 4). We expect yet further transformations would be induced at deeper depths accompanied by a possible release of water by up to ca. 20.1 wt.% (Supplementary Table 5). It is important to note that, under a non-penetrating silicone oil medium, no structural transformations are observed, and the original birnessite persists up to 5.18(10) GPa with a bulk modulus of 60(1) GPa, which is essentially the same as the one determined from the experiments using penetrating water medium (Fig. 2 and Supplementary Fig. 6).
Manganese oxides in aqueous terrestrial depth environments
It has long been proposed that the distribution of terrestrial manganese deposits is of hydrothermal origin and might be related to subduction processes20. Burns40 predicted manganese mineralization associated with subduction at the Tonga-Kermadec ridge, where manganese deposits of presumed hydrothermal origin are found over a distance of 1800 km20. Mineralization of manganese deposits has also been proposed to be contemporaneous with copper and other metals within calc-alkaline terrains associated with active and recently active subduction zones19. Subducting manganese minerals might be incorporated into fluids or melts which rise to form calc-alkaline hydrothermal vents or magmatism. Plank and Langmuir41 reported MnO content of approximately 2 wt.% in the sediment near the Tonga trench, and Rea and Ruff42 estimated an average sediment flux through the Tonga trench by ca. 164.7 × 1012 g/yr. If we assume that half of the subducting Mn would be in the form of birnessite, the amount of water transported via super-hydrated birnessite, i.e., buserite, along the Tonga subduction zone would be ca. 7.78 Gg/yr, which is about 1/7 of water that can be transported by super-hydrated kaolinite, i.e., ca. 57.08 Gg/yr34, assuming its abundance in the sediments to be ca. 10 wt.% (Supplementary Table 5). Such an estimation is in line with the high ε205Tl observed in the Tonga-Kermadec lava22 as Tl isotopes are known to fractionate only when sorbed onto birnessite43. It is also interesting to note that the depth range where the super-hydrated sedimentary minerals exist would span from ca. 5 km to 200 km along a cold subduction zone, i.e., super-hydrated birnessite between ca. 5 km and 70 km and super-hydrated kaolinite between ca. 75 km and 200 km. A schematic illustration of water transportation via subducting manganese minerals is shown in Fig. 4a.
The depth where super-hydrated birnessite, e.g., buserite, forms is as shallow as 5 km along a cold subduction zone24 (Fig. 4a). The fact that buserite, as the most hydrated mineral with ca. 34.5 water wt. %, forms at the interface between a subducting slab and an overriding wedge needs to be taken into account when modeling subduction-related processes, especially in such shallow depths region. It has recently been shown that the presence of low-friction layered minerals, such as smectite, may play an important role in dynamic weakening processes leading to large earthquakes44,45. The low shear strength of layered minerals with weak interlayer forces, particularly upon abrupt interlayer expansion via super-hydration, would promote earthquake ruptures by large slips in a shallow subduction interface. In fact, we showed that buserite is two times more compressible than birnessite and possesses an anisotropic compression behavior, which may contribute to oriented microstructures and seismic anisotropy (Supplementary Fig. 6).
Upon transformation of buserite into denser hydrous manganite, at ca. 70 km depth, a significant amount of water by ca. 24.3 wt.% is released together with a reduction of Mn4+ into Mn3+ and exfoliation of Na+ ions. This would increase the relative fluid volume in the region and affect the alkalinity of the subducting fluid46. Water release and reduction of Mn in such a depth range might trigger the release of the sorbed Tl to be incorporated to serpentinization in the Mariana forearc21. At a depth near 100 km, a further release of water by ca. 10.2 wt.% occurs due to the transformation of manganite into an anhydrous denser mineral, hausmannite (Fig. 4 and Supplementary Table 4). Although limited in abundance in the case of Mn oxides, such a dehydration and subsequent embrittlement into hard minerals along a subducting slab have been established to be associated with the formation of intermediate-depth earthquakes47, which account for ca. 86% of earthquakes down to ca. 150 km depth along the Tonga subduction zone. A further change in the alkalinity of surrounding fluid is anticipated as the transformation of manganite into hausmannite is accompanied by a partial reduction of ca. 1/3 Mn3+ into Mn2+. Conversely, subsequent transformation of anhydrous hausmannite into pyrochroite at a depth near ca. 120 km involves the incorporation of water, i.e., hydration, in the form of structural hydroxyls with ca. 20.1 wt.% (Fig. 4a and Supplementary Table 5). This is accompanied by a further reduction of Mn3+ in hausmannite to Mn2+, thereby completing the progressive depth-dependent manganese reduction sequence from Mn4+/Mn3+ to Mn2+.
Most of the dissolved manganese in the ocean are known to be in the form of Mn2+ in hydrothermal fluids48,49,50,51. As mentioned earlier, recently discovered high concentrations of Mn2+ in rocks in the Gale crater on Mars10,11 and in Martian meteorites52,53 point to past episodes of strongly oxidizing conditions and the presence of aqueous environments. Taking into account our observations of successive and progressive transformation of manganese oxide minerals as a function of depth may also guide understanding commonalities and differences of complex geophysical and geochemical processes between different terrestrial planets. Our results thus provide a new platform to understand the phase relationships of various manganese oxide minerals in an extended terrestrial depth environment to impact water transport, redox capacity, and related elemental cycling of the region.
Methods
Samples
A powder sample of synthetic birnessite was provided by Kyungpook National University54. The chemical composition of the sample was analyzed using X-ray photoelectron spectroscopy (XPS) at the Yonsei Center for Research Facilities and revealed a composition of (Na0.54(2)K0.01(1))Mn1.92(4)O4 ∙ 1.62(1)H2O. The H2O content of birnessite was determined using thermogravimetric analysis (TGA, SDT Q600, TA Instruments) at the Industry University Cooperation Foundation at Hanyang University. During TGA, argon gas was flowing at 100 ml/min, and the temperature was increased to 850 °C at a rate of 10 °C/min (Supplementary Fig. 1). To confirm the phase purity, the sample was loaded into a borosilicate-capillary of 0.5 mm diameter and measured using a laboratory XRD up to 90˚ in 2θ (Rigaku MicroMax-007HF, Mo Kα radiation) at the Institute for High-pressure Mineral Physics and Chemistry at Yonsei University. The crystalline phase was identified as pure birnessite with unit-cell parameters of a = 5.174(1) Å, b = 2.854(1) Å, c = 7.321(1) Å, α = 89.56(3)˚, β = 103.19(2)˚, γ = 90.05(4)˚ in space group C\(\bar{1}\), which are similar to values reported in the literature25.
Ex-situ high-pressure synchrotron X-ray powder diffraction
Ex-situ high-pressure and temperature synchrotron X-ray powder diffraction (XRD) experiments were performed at the 3D beamline at the Pohang Light Source II (PLS-II) at the Pohang Accelerator Laboratory (PAL), Pohang, Korea. X-ray beam from a bending magnet was monochromatized using a Si(111) double-crystal to select a wavelength of 0.6888(1) Å (18 keV) and reduced to a 100 μm diameter using a pinhole. A MAR 345 image plate was used as a detector, which was calibrated using a NIST LaB6 standard (SRM-660C). A symmetric-type diamond anvil cell (DAC) containing a pair of type-I diamonds with 700 μm diameter culets was used to create hydrostatic pressures. A few small ruby spheres were added to the sample chamber as pressure markers in the fluorescence method55. Additional synchrotron X-ray diffraction experiments were performed at the 6D beamline of PLS-II using a Raynoix Mx225-HS detector to confirm the observations made at the 3D beamline and to obtain higher quality XRD patterns suitable for the Rietveld analysis. The X-ray used was 0.6530(1) Å in wavelength and 150 μm in diameter. We also performed supplementary XRD measurements at the BL-18C beamline at Photon Factory (PF), KEK using synchrotron X-ray of 20 keV and at the Institute for High-pressure Mineral Physics and Chemistry at Yonsei University using micro-focused rotating-anode X-ray from Mo target (Rigaku MicroMax-007HF).
Two different types of fluids were used as a pressure-transmitting medium (PTM): water as a pore-penetrating PTM to allow pressure-induced hydration (i.e., super-hydration56) (Supplementary Fig. 2a) and silicone oil as a nonpore-penetrating PTM to probe the intrinsic compressibility of the sample under quasi-hydrostatic conditions (Supplementary Fig. 6). The maximum pressure applied was 4.9(1) GPa with water PTM and 5.2(1) GPa with silicone oil PTM. When using water PTM, occasional heating was done ex-situ by placing the DAC in an oven for 1 hr in order to melt the high-pressure ice formed and to simulate the cold subduction thermal gradient.
In-situ high-pressure synchrotron X-ray powder diffraction
In-situ high-pressure and temperature synchrotron XRD experiments were performed using a resistively-heated DAC (RH-DAC) at the 13-BM-C beamline at the Advanced Photon Source at the Argonne National Laboratory. The X-ray beam used was monochromated to 0.4340 Å with eV bandwidth in wavelength, and a Pliatus3 1 M detector was used to collect the XRD patterns. The sample-to-detector distance and the tilt of the detector were calibrated with a NIST LaB6 powder standard. A membrane-driven pressure control system (GE Pace5000) was coupled to the RH-DAC, and a resistive heating coil (Kanthal wire) was installed around the anvil to create simultaneous high pressure and temperature conditions following the cold subduction thermal gradient24. The temperature was monitored using a K-type thermocouple attached to the anvil close to the sample chamber, which provided the maximum uncertainties of ±3 °C. A small amount of Au powder was mixed with the sample powder to be used as an internal pressure marker during the in-situ experiments57.
High-pressure XRD in a kilobar regime using FluoSphere®
A FluoSpheres® method58 was applied to investigate the onset pressure of super-hydration in a kilobar regime, i.e., pressures below ca. 0.25 GPa. For this ‘low-pressure’ experiment, a pair of type-I diamonds with 1000 μm diameter culets were used under water PTM. A green laser with 515 nm wavelength was used to excite the FluoSphere® (and ruby as an independent pressure marker above ca. 0.25 GPa). Laboratory XRD data were measured from 0.007(20) GPa to a maximum pressure of 0.99(2) GPa at the Institute for High-pressure Mineral Physics and Chemistry at Yonsei University. At each pressure, the sample in the DAC was in equilibrated for at least 5 min before the XRD measurement (Fig. 1b).
Rietveld structure refinements
The structure refinements of the original birnessite and its super-hydration and transformation products, i.e., buserite, manganite, hausmannite, and pyrochroite, were performed using the Rietveld method implemented in the GSAS suite of programs59,60 (Supplementary Table 2). For the birnessite and buserite models, the background was estimated manually, while for manganite, hausmannite, and pyrochroite, the background was fitted using a Chebyshev polynomial with ≤34 coefficients. Peak profiles were fitted using the Pseudo-Voigt profile function proposed by Thompson et.al61. with the asymmetry correction introduced by Finger et al.62. Except for buserite, previously determined crystal structures were used as starting models for the respective refinements25,63,64,65. In the case of buserite, Difference-Fourier synthesis was performed after initial refinements using only the MnO2 layers, which revealed residual electron densities at two crystallographically distinct interlayer sites: the OW1 site in the middle of the MnO2 layers at (−0.038(1), 0.304(1), 0.477(1)) was modeled as an oxygen-sodium mixed site, as in the birnessite model, while the OW2 site at (−0.169(5), 0.825(3), 0.320(1)), sandwiching the OW1 site in the middle, was modeled as an oxygen atom of a water molecule. The occupancy of Na at the OW1 site was fixed to the value in the birnessite model, i.e., 0.54 per unit cell, while the occupancy of O at the OW2 site was fixed to unity as the refinement showed nearly full occupancy. Soft restraints were applied to the Mn-O interatomic distances for the MnO6 octahedron, e.g., 1.93(1) Å25, to supplement the observed data. In order to further reduce the number of parameters, the atomic displacements were modeled to be isotropic (Uiso) and grouped to be the same for all the atoms. The final convergence was achieved by refining the atomic fractional occupancy of oxygen at the OW1 site, displacement parameters, 2θ zero, profile parameters, scale factor, and lattice parameters. To derive the bulk moduli and linear compressibilities, the LeBail profile fitting was performed for all ex-situ XRD patterns (Fig. 2 and Supplementary Table 1), and the 2nd order Birch-Murgnahan equation of states was used to fit the volume-pressure data (Supplementary Fig. 6). Final structural models from the Rietveld refinements are summarized in Fig. 3 and Supplementary Tables 2–3 with the final fits shown in Supplementary Fig. 7. Bond valence sums (BVS) were calculated using the final refined models and the EXPO 2014 program37.
Postmortem analyses of the recovered samples
Each recovered sample was characterized by XRD before proceeding with other measurements. Scanning electron microscopy (SEM) was performed to compare the crystal morphologies of the recovered manganite (from 2.50(10) GPa and 200 °C), hausmannite (from 3.70(10) GPa and 300 °C), and pyrochroite (from 4.37(1) GPa and 525(3) °C) samples to that of the original birnessite. Each sample was coated with platinum, and a JEOL-7800F was used at 10 kV or 15 kV (Supplementary Fig. 4). XPS was employed to determine the oxidation states of manganese in the recovered manganite (from 1.98(10) GPa and 200 °C), hausmannite (from 2.50(10) GPa and 300 °C), and pyrochroite (from 4.37(1) GPa and 525(3) °C) samples. The X-ray source used was an Al Kα at pass energy 40 eV and step size 0.1 eV (K-alpha, Thermo VG), and the samples were measured under vacuum conditions (Supplementary Figs. 4). In order to observe the transformation pathways and products via atomistic scale imaging, scanning transmission electron microscopy (STEM) was performed on the recovered manganite (from 4.20(10) GPa and 200 °C) and hausmannite (from 6.92(10) GPa and 300 °C) samples using a JEOL JSM 5610 LV at Yonsei University and a JEOL JEM-2100F equipped with a CEOS Cs corrector on the illumination system at the University of South Carolina. The images were recorded with a 200 kV electron beam and a Fischione Model 3000 HAADF detector (Supplementary Fig. 8). The extraction of Na+ cations during the transformation of buserite to manganite was confirmed by X-ray fluorescence (XRF) spectroscopy using the recovered manganite sample from 2.29(10) GPa and 200 °C using the M4 Tornado instrument (Bruker Co.) at the Institute for High-pressure Mineral Physics and Chemistry at Yonsei University. A 2D elemental distribution was measured using a 25 μm diameter X-ray beam from an Rh-target (Supplementary Fig. 3).
Data availability
All data generated or analyzed during this study are included with this published article and its Supplementary Information.
References
Wang, H. S., Lineweaver, C. H. & Ireland, T. R. The elemental abundances (with uncertainties) of the most Earth-like planet. Icarus 299, 460–474 (2018).
Post, J. E. Manganese oxide minerals: Crystal structures and economic and environmental significance. Proc. Natl Acad. Sci. 96, 3447–3454 (1999).
Novotnik, B., Zorz, J., Bryant, S. & Strous, M. The effect of dissimilatory manganese reduction on lactate fermentation and microbial community assembly. Front. Microbiol. 10, 1007 (2019).
Morgan, J. J. Manganese in natural waters and earths crust: Its availability to organisms. Met. Ions Biol. Syst. 37, 1–34 (2000).
Hein, J. R. Manganese nodules. Encycl. Mar. Geosci. 1, 408–412 (2016).
Crerar, D. A. & Barnes, H. L. Deposition of deep-sea manganese nodules. Geochim. Cosmochim. Acta 38, 279–300 (1974).
Toro, N., Jeldres, R. I., Ordenes, J. A., Robles, P. & Navarra, A. Manganese nodules in Chile, an alternative for the production of Co and Mn in the future–A review. Minerals 10, 674 (2020).
International Seabed Authority. A Geological Model of Polymetallic Nodule Deposits in the Clarion-Clipperton Fracture Zone. Technical study 6 (Kingston, 2010)
Taylor, S. R. & McLennan, S. Planetary crusts: their composition, origin and evolution. 10 (Cambridge University Press, 2009).
Lanza, N. L. et al. High manganese concentrations in rocks at Gale crater, Mars. Geophys. Res. Lett. 41, 5755–5763 (2014).
Lanza, N. L. et al. Oxidation of manganese in an ancient aquifer, Kimberley formation, Gale crater, Mars. Geophys. Res. Lett. 43, 7398–7407 (2016).
DiGregorio, B. E. Rock varnish and the manganese oxide connection. Anal. Chem. 77, 433A–438A (2005).
McCubbin, F. M. et al. Geologic history of Martian regolith breccia Northwest Africa 7034: Evidence for hydrothermal activity and lithologic diversity in the Martian crust. J. Geophys. Res. Planets 121, 2120–2149 (2016).
Canil, D. Vanadium in peridotites, mantle redox and tectonic environments: Archean to present. Earth Planet. Sci. Lett. 195, 75–90 (2002).
Evans, K. A. The redox budget of subduction zones. Earth-Sci. Rev. 113, 11–32 (2012).
Morgan, J. J. & Stumm, W. Aquatic chemistry: chemical equilibria and rates in natural waters. (Wiley, 1996).
DS Rogers DS Cronan, T, R. A. H. Hydrothermal manganese deposits from the Tonga-Kermadec Ridge and Lau Basin region, southwest Pacific. Mar. Georesources Geotechnol. 19, 245–268 (2001).
Eckhardt, J. D., Glasby, G. P., Puchelt, H. & Berner, Z. Hydrothermal manganese crusts from Enarete and Palinuro Seamounts in the Tyrrhenian Sea. Mar. Georesources Geotechnol. 15, 175–208 (1997).
Thonis, M. & BURNS, R. G. Manganese ore deposits and plate tectonics. Nature 253, 614–616 (1975).
Glasby, G. P. Hydrothermal manganese deposits in island arcs and related to subduction processes: a possible model for genesis. Ore Geol. Rev. 4, 145–153 (1988).
Nielsen, S. G., Klein, F., Kading, T., Blusztajn, J. & Wickham, K. Thallium as a tracer of fluid-rock interaction in the shallow Mariana forearc. Earth Planet. Sci. Lett. 430, 416–426 (2015).
Nielsen, S. G. et al. Thallium isotopes as tracers of recycled materials in subduction zones: Review and new data for lavas from Tonga-Kermadec and Central America. J. Volcanol. Geotherm. Res. 339, 23–40 (2017).
Nakagawa, M., Santosh, M. & Maruyama, S. Manganese formations in the accretionary belts of Japan: implications for subduction accretion process in an active convergent margin. J. Asian Earth Sci. 42, 208–222 (2011).
Syracuse, E. M., van Keken, P. E. & Abers, G. A. The global range of subduction zone thermal models. Phys. Earth Planet. Inter. 183, 73–90 (2010).
Lopano, C. L., Heaney, P. J., Post, J. E., Hanson, J. & Komarneni, S. Time-resolved structural analysis of K-and Ba-exchange reactions with synthetic Na-birnessite using synchrotron X-ray diffraction. Am. Mineral. 92, 380–387 (2007).
Post, J. E. & Veblen, D. R. Crystal structure determinations of synthetic sodium, magnesium, and potassium birnessite using TEM and the Rietveld method. Am. Mineral. 75, 477–489 (1990).
Lucht, K. P. & Mendoza-Cortes, J. L. Birnessite: A layered manganese oxide to capture sunlight for water-splitting catalysis. J. Phys. Chem. C. 119, 22838–22846 (2015).
Giovanoli, R., Feitknecht, W. & Fischer, F. Über Oxidhydroxide des vierwertigen Mangans mit Schichtengitter. 3. Mitteilung. Reduktion von Mangan (III)‐manganat (IV) mit Zimtalkohol. Helv. Chim. Acta 54, 1112–1124 (1971).
Burns, R. G., Burns, V. M. & Stockman, H. W. A review of the todorokite-buserite problem; implications to the mineralogy of marine manganese nodules. Am. Mineral. 68, 972–980 (1983).
Giovanoli, R. A. review of the todorokite–buserite problem: implications to the mineralogy of marine manganese nodules: discussion. Am. Mineral. 70, 202–204 (1985).
Lee, S. & Xu, H. XRD and TEM studies on nanophase manganese oxides in freshwater ferromanganese nodules from Green Bay, Lake Michigan. Clays Clay Min. 64, 523–536 (2016).
Atkins, A. L., Shaw, S. & Peacock, C. L. Nucleation and growth of todorokite from birnessite: Implications for trace-metal cycling in marine sediments. Geochim. Cosmochim. Acta 144, 109–125 (2014).
Holland, K. L. & Walker, J. R. Crystal structure modeling of a highly disordered potassium birnessite. Clays Clay Min. 44, 744–748 (1996).
Hwang, H. et al. A role for subducted super-hydrated kaolinite in Earth’s deep water cycle. Nat. Geosci. 10, 947–953 (2017).
Filio, J. M., Sugiyama, K., Kasai, E. & Saito, F. Effect of dry mixed grinding of talc, kaolinite and gibbsite on preparation of cordierite ceramics. J. Chem. Eng. Jpn. 26, 565–569 (1993).
Li, Y. et al. From α-NaMnO 2 to crystal water containing Na-birnessite: enhanced cycling stability for sodium-ion batteries. CrystEngComm 18, 3136–3141 (2016).
Altomare, A. et al. EXPO2013: a kit of tools for phasing crystal structures from powder data. J. Appl. Crystallogr. 46, 1231–1235 (2013).
Birch, F. Finite elastic strain of cubic crystals. Phys. Rev. 71, 809 (1947).
Fei, Y. et al. Toward an internally consistent pressure scale. Proc. Natl Acad. Sci. USA. 104, 9182–9186 (2007).
Burns, R. G. Metallogenesis of transition elements at convergent plate margins in the Southwest Pacific. CCOP/SOPAC Tech. Bull. 2, 14–20 (1976).
Plank, T. & Langmuir, C. H. The chemical composition of subducting sediment and its consequences for the crust and mantle. Chem. Geol. 145, 325–394 (1998).
Rea, D. K. & Ruff, L. J. Composition and mass flux of sediment entering the world’s subduction zones: Implications for global sediment budgets, great earthquakes, and volcanism. Earth Planet. Sci. Lett. 140, 1–12 (1996).
Nielsen, S. G. et al. Towards an understanding of thallium isotope fractionation during adsorption to manganese oxides. Geochimica et Cosmochimica Acta. 117, 252–265 https://doi.org/10.1016/j.gca.2013.05.004 (2013).
Ikari, M. J. & Kopf, A. J. Seismic potential of weak, near-surface faults revealed at plate tectonic slip rates. Sci. Adv. 3, e1701269 (2017).
Hirono, T., Tsuda, K. & Kaneki, S. Role of weak materials in earthquake rupture dynamics. Sci. Rep. 9, 1–7 (2019).
Galvez, M. E., Connolly, J. A. & Manning, C. E. Implications for metal and volatile cycles from the pH of subduction zone fluids. Nature 539, 420–424 (2016).
Jung, H., Green Ii, H. W. & Dobrzhinetskaya, L. F. Intermediate-depth earthquake faulting by dehydration embrittlement with negative volume change. Nature 428, 545–549 (2004).
Mandernack, K. W. & Tebo, B. M. Manganese scavenging and oxidation at hydrothermal vents and in vent plumes. Geochim. Cosmochim. Acta 57, 3907–3923 (1993).
Wolfram, O. & Krupp, R. E. Hydrothermal solubility of rhodochrosite, Mn (II) speciation, and equilibrium constants. Geochim. Cosmochim. Acta 60, 3983–3994 (1996).
Templeton, A. S., Staudigel, H. & Tebo, B. M. Diverse Mn (II)-oxidizing bacteria isolated from submarine basalts at Loihi Seamount. Geomicrobiol. J. 22, 127–139 (2005).
van Hulten, M. et al. Manganese in the world ocean: A first global model. Biogeosciences Discuss 14, 1–38 (2016).
Liu, Y. et al. Evidence for O2-Rich Environments on Mars from Hydrous Mn(IV)-Oxides in Northwest Africa (NWA) 7034 and 7533 Meteorites. Lunar and Planetary Science XLVIII 2017.
Cao, F., Flemming, R. L., Moser, D. E., Barker, I. R. & Song, Y. Mineralogy and shock effects in Martian breccia NWA 8171 by micro XRD and raman spectroscopy. Goldschmidt Abstr. 2018, 330 (2018).
Min, S. & Kim, Y. Physicochemical Characteristics of the Birnessite and Todorokite Synthesized Using Various Methods. Minerals 10, 884 (2020).
Mao, H. K., Xu, J. A. & Bell, P. M. Calibration of the ruby pressure gauge to 800 kbar under quasi‐hydrostatic conditions. J. Geophys. Res. 91, 4673–4676 (1986).
Lee, Y., Vogt, T., Hriljac, J. A., Parise, J. B. & Artioli, G. Pressure-induced volume expansion of zeolites in the natrolite family. J. Am. Chem. Soc. 124, 5466–5475 (2002).
Dorogokupets, P. I. & Dewaele, A. Equations of state of MgO, Au, Pt, NaCl-B1, and NaCl-B2: Internally consistent high-temperature pressure scales. High. Press. Res. 27, 431–446 (2007).
Picard, A. et al. A sensitive pressure sensor for diamond anvil cell experiments up to 2 GPa: FluoSpheres®. J. Appl. Phys. 100, 34915 (2006).
Larson, A. C. & Von Dreele, R. B. Gsas: General structure analysis system (Los Alamos National Laboratory,1986).
Toby, B. H. EXPGUI, a graphical user interface for GSAS. J. Appl. Crystallogr. 34, 210–213 (2001).
Thompson, P., Cox, D. E. & Hastings, J. B. Rietveld refinement of Debye–Scherrer synchrotron X-ray data from Al2O3. J. Appl. Crystallogr. 20, 79–83 (1987).
Finger, L. W., Cox, D. E. & Jephcoat, A. P. A correction for powder diffraction peak asymmetry due to axial divergence. J. Appl. Crystallogr. 27, 892–900 (1994).
Kohler, T., Armbruster, T. & Libowitzky, E. Hydrogen Bonding and Jahn-Teller Distortion in Groutite, a-MnOOH, and Manganite, g-MnOOH, and Their Relations to the Manganese Dioxides Ramsdellite and Pyrolusite. J. Solid State Chem. 133, 486–500 (1997).
Baron, V., Gutzmer, J., Rundlöf, H. & Tellgren, R. The influence of iron substitution on the magnetic properties of hausmannite, Mn2+ (Fe, Mn) 3+ 2O4. Am. Miner. 83, 786–793 (1998).
Parise, J. B. et al. Pressure dependence of hydrogen bonding in metal deuteroxides: a neutron powder diffraction study of Mn (OD) 2 and β-Co (OD) 2. Phys. Chem. Miner. 25, 130–137 (1998).
Acknowledgements
This work was supported by the Leader Researcher program (NRF-2018R1A3B1052042) of the Korean Ministry of Science and ICT. Ex-situ synchrotron experiments were performed at the 3D and 6D beamlines at the Pohang Light Source II (PLS II) at the Pohang Accelerator Laboratory (PAL) with support in part by MSIP, POSTECH, and UNIST Central Research facilities, and BL-18C beamline at Photon Factory (PF). In-situ synchrotron experiments were performed 13-BM-C beamline at Advanced Photon Source (APS), which is supported by GSECARS (NSF EAR-1634415 and DOE DE-FG02-94ER14466) and COMPRES (NSF EAR-1606856).
Author information
Authors and Affiliations
Contributions
S.Y. contributed to the experiments and data analysis with the help from H.H. and G.H. Y.K. provided the sample, and D.B. contributed to electron microscopy. T.J, T.S, D.Z., and H.K. helped experiments at synchrotron laboratories. Y.L. designed the research, discussed the results with T.V. and J.P. and worked on the manuscript with all authors.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Christina Lopano and Sune Nielsen for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yun, S., Hwang, H., Hwang, G. et al. Super-hydration and reduction of manganese oxide minerals at shallow terrestrial depths. Nat Commun 13, 1942 (2022). https://doi.org/10.1038/s41467-022-29328-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-29328-y
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.