Abstract
Hv1/VSOP is a dimeric voltage-gated H+ channel in which the gating of one subunit is reportedly coupled to that of the other subunit within the dimer. The molecular basis for dimer formation and intersubunit coupling, however, remains unknown. Here we show that the carboxy terminus ends downstream of the S4 voltage-sensor helix twist in a dimer coiled-coil architecture, which mediates cooperative gating. We also show that the temperature-dependent activation of H+ current through Hv1/VSOP is regulated by thermostability of the coiled-coil domain, and that this regulation is altered by mutation of the linker between S4 and the coiled-coil. Cooperative gating within the dimer is also dependent on the linker structure, which circular dichroism spectrum analysis suggests is α-helical. Our results indicate that the cytoplasmic coiled-coil strands form continuous α-helices with S4 and mediate cooperative gating to adjust the range of temperatures over which Hv1/VSOP operates.
Similar content being viewed by others
Introduction
Hv1/VSOP is a recently discovered voltage-gated H+ channel (Hv)1,2 that is expressed in immunocytes and is involved in the production of reactive oxygen species in phagocytes3,4,5 and the antigen response in B lymphocytes6. Hv1/VSOP has four-transmembrane segments that correspond to the voltage-sensor domain (S1-S4) of other voltage-gated channels1,2, it does not have a canonical pore domain, and the voltage-sensor domain is thought to act as both the voltage-sensor and the H+-permeation pathway7. The composition of the functional unit by the minimally designed voltage-gated channel subunit is dimeric8,9,10.
Most types of ion channels have oligomeric architectures. In the case of the voltage-gated K+ channel (Kv), electrophysiological studies with toxin blockers showed the functional unit to be a tetramer11, a finding that was confirmed by X-ray crystallography12,13,14,15. Assembly of the four subunits into the tetrameric channel forms the permeation pathway in the centre. In the Hv channel, by contrast, only one subunit of the dimeric functional unit is sufficient for its channel activity8,10. The functional role of dimer formation, hence, lies outside the formation of the permeation pathway.
One characteristic derived from the dimer assembly in the Hv channel is the cooperative channel gating—that is, the gating movement of one monomeric channel subunit affects the gating of the other subunit within the dimeric unit16,17,18. However, it remains unclear through which part of the channel the conformational change is transmitted from one subunit to the other during channel gating. A certain level of physical intersubunit contact between transmembrane regions has been shown by biochemical approaches9, raising the possibility that the cooperative gating in the dimer is mediated via interaction between the tramsmembrane domains. Meanwhile, Hv1/VSOP contains a conserved coiled-coil motif in the cytoplasmic region. The dimeric structure of the carboxy terminus cytoplasmic coiled-coil domain of the human Hv1/VSOP was analysed recently19. This indicates that the Hv channel has an intersubunit contact in the cytoplasmic region. However, the roles of the coiled-coil domain in the function of Hv channels remain unclear. One possibility for the significance of the coiled-coil is that it is required for situating two monomers close to each other and provides just a platform for a physical interaction between two monomers in the membrane. The other possibility is that the conformational change of one subunit is transmitted to the other by the cytoplasmic coiled-coil, and the structural features and the chemical properties of the coiled-coil domain make significant contributions to channel gating.
To address this issue and to investigate the significance of dimerization, we analyse the relationship between dimer formation and channel gating in the mouse Hv channel (mHv1/VSOP) using X-ray crystallography, circular dichroism (CD) spectroscopy and electrophysiology. We find that dimer formation and cooperative gating in mHv1/VSOP are mediated via the cytoplasmic domain. We also find that this mechanical interaction by the dimeric assembly unit was wrought by an uninterrupted helical structure from S4 to the coiled-coil region.
Results
Coiled-coil assembly domain of mHv1/VSOP and its structure
Hv1/VSOP is a minimal voltage-gated ion channel that has only four transmembrane regions (S1-S4), which comprise a voltage-sensor domain1,2. In addition, a C-terminal cytoplasmic domain consisting of ~55 residues is well conserved among species (Fig. 1a). Beginning ~10 residues C-terminal to the last transmembrane domain (S4), there is a distinctive heptad repeat pattern (abcdefg)n characteristic of a coiled-coil architecture, in which the 'a' and 'd' positions are hydrophobic amino acids and other positions are hydrophilic (Fig. 1a; Supplementary Fig. S2a).
To verify that the C-terminal cytoplasmic domain is required for formation of the Hv channel dimer, crosslinking assays were performed on the mouse Hv1/VSOP (mHv1/VSOP) expressed in HEK293 cells. In full-length mHv1/VSOP, a twofold molecular weight on SDS–PAGE was observed with disuccinimidyl suberate (DSS) (Fig. 1b)10, confirming that mHv1/VSOP is expressed as a dimer. Deletion of the C-terminal domain (ΔC) remarkably reduced the dimer fraction (Fig. 1b). Sedimentation equilibrium experiments showed that the C-terminal domain of mHv1/VSOP protein forms dimer in solution (Supplementary Fig. S1a).
To determine the biochemical characteristics of the coiled-coil of mHv1/VSOP, we solved a crystal structure of the coiled-coil domain (mHv1/VSOP-cc, residues 220–269), and compared it with the human Hv1/VSOP (hHv1/VSOP) coiled-coil19. The amino terminus of the mHv1/VSOP coiled-coil is bent and deviates from the hHv1/VSOP structure (Fig. 1c). The coiled-coil core consists largely of well-packed hydrophobic residues. In the centre of the N-terminal half, hydrophilic Asn residues (N231), instead of hydrophobic residues, comprise the core at layer 3 (Fig. 1c). They are asymmetrically packed, and, notably, the side-chain of N231 shows a flipped geometry in comparison with the hHv1/VSOP structure (Fig. 1c). The neighbouring residues, at positions 'g' and 'b', are unusually hydrophobic (I230 and I232) (Fig. 1a; Supplementary Fig. S2a). Given the reports from the GCN4 coiled-coil, a yeast leucine zipper protein20,21,22, the hydrophilic core residues, N231, could be a weakness of the core packing stability. Other structure features are the lack of inter-subunit polar interaction that stabilizes the assembly23,24,25 (Supplementary Fig. S2b) and the dual-conformation of Cys residues in the core, suggesting a possibility of switching of the disulfide bonding in response to redox (Supplementary Fig. S2c).
The temperature dependence of the CD signal of mHv1/VSOP-cc shows a cooperative loss of structure (Fig. 3d and Supplementary Fig. S1b), consistent with a well-folded complex having an extensive hydrophobic core. The melting temperature (apparent Tm= 40.6, 40.8 °C (n=2)) was lower than those of other naturally occurring coiled-coil proteins (Tm>60 °C)26,27,28,29, and unfolding of the mHv1/VSOP-cc coiled-coil was irreversible (Fig. 3d). Thus, the mHv1/VSOP assembles into a dimer using a cytoplasmic dimer coiled-coil architecture that is a well-folded and thermally labile coiled-coil. Structure details and comparisons with hHv1/VSOP are summarized in Supplementary Fig. S2.
Thermostability of the coiled-coil and the channel gating
We assessed the functional significance of dimeric coiled-coil assembly in the mHv1/VSOP, using whole-cell patch clamp recordings. Deletion of the C-terminal coiled-coil domain accelerated the channel's activation kinetics (Fig. 2a). The activation kinetics reflect the transition between the open and closed states of the channel and are temperature-dependent, and, given that the assembly of the mHv1/VSOP coiled-coil was thermally labile (Fig. 3d; Supplementary Fig. S1b), we analysed the relationship between temperature and activation kinetics. We found that the activation kinetics of the full-length channel at 40 °C was similar to that of ΔC at 25 °C, while activation of the full-length channel at 30 °C was similar to that of ΔC at 15 °C (Fig. 2a). Thus deletion of the coiled-coil domain shifted the thermosensitivity relationship by 15 °C without changing the slope (Fig. 2b). In the analyses of the temperature-dependent activation, we confirmed that the kinetics was not dependent on the current amplitude but highly dependent on the recording temperature (Supplementary Figs S3a,b). We also analysed the effect of the pre-heating for the activation kinetics, and activation kinetics were little changed by the preheating (Supplementary Fig. S3c).
We next tested the effects of introducing mutations that disrupt the coiled-coil. Bulky hydrophilic Arg residues were introduced into the well-packed hydrophobic core layers in the C-terminal half of the coiled-coil (layers 5, 6, 9 and 10 in Fig. 1c and Supplementary Fig. S2a). This '4R' mutation accelerated the channel's activation kinetics to some extent (Fig. 3a), and shifted the thermosensitivity relationship by ~8 °C in the direction of the ΔC phenotype (Fig. 3b). We also confirmed that assembly of the dimeric coiled-coil domain was suppressed in the 4R mutant as shown by size exclusion chromatography (Fig. 3c). On the other hand, to stabilize the coiled-coil assembly, we introduced an inverse mutation, NIN, into the amino-acids sequence at INI (230–232), where the NIN mutation makes the periodic hydrophobicity more complete in the heptad-repeat of the coiled-coil protein21. The NIN mutation showed a slower activation (Fig. 3a) and shifted the thermosensitivity relationship by ~5 °C away from the wild-type (WT) phenotype (Fig. 3b). In the CD spectrum of the coiled-coil protein, the coiled-coil folding became reversible (Fig. 3d; Supplementary Fig. S1c). The melting was non-sigmoidal, suggesting that the melting occurs in a more complex manner than a simple two-state transition (Fig. 3d). These results suggest that the characteristics of the coiled-coil assembly were altered and stabilized by the NIN mutation. The single-point mutation, N231L, did not lead to a clear change in the activation kinetics, suggesting that the surrounding residues, I230 and I232, also contribute to the stability of the coiled-coil (Supplementary Fig. S4). We also confirmed that NIN mutation did not change the dimer stoichiometry (Fig. 3c). Taken together, the stability of the C-terminal domain determined the channel activation kinetics in a temperature-dependent manner such that coiled-coil dimer assembly inhibited channel activation.
Importance of the linker in the temperature-dependent gating
The ΔC channel retains a monomeric form (Fig. 1b), whereas the WT channel assembles as a dimeric channel and the gating showed higher thermostability (Fig. 2a,b). Suppression of the dimerization by 4R mutation destabilized the thermostability of the gating (Fig. 3a,b). One interpretation for these results could be that the mere dimerization of the channel can lead to thermostability of the gating by spacing two monomers in close proximity. To test this idea, we made two types of concatenated channel harbouring/lacking the coiled-coil domain (Tandem/ΔC-Tandem) and analysed their activation (Fig. 4a, illustration). The Tandem channel showed similar activation kinetics to WT (Fig. 4a). On the other hand, the ΔC-Tandem channel showed faster activation kinetics than WT, and the thermosensitivity relationship was indistinguishable from that of the ΔC phenotype (Fig. 4a). We also confirmed that both of the N-terminal and the C-terminal subunit in the ΔC-Tandem channel are intact in function (Supplementary Fig. S5). These results suggest that the mere positional proximity of two channels is not sufficient to produce the thermal stability in the WT phenotype, and the coiled-coil domain is necessary.
The coiled-coil structure that we characterized begins only five residues, Ser215-Val216-Lys217-Thr218-Arg219 (linker region, Fig. 4a), downstream of the last transmembrane helix. The last transmembrane helix corresponds to the S4 of voltage-gated channels and is known to move substantially when the channel opens30,31. It is possible that the ΔC-Tandem channel lost proper strand orientation for dimer interaction, thereby failing to show the wild-type dimer phenotype. We therefore examined the activation kinetics of mutants whose linker sequences were altered by substituting three residues in the linker sequence, Val-Leu-Thr (underlined in Fig. 4a), with Gly-Gly-Gly or Ala-Ala-Ala. The thermosensitivity relationship of the GGG mutant showed the ΔC phenotype, while that of the AAA mutant showed the WT phenotype (Fig. 4b). This suggests that linker flexibility/stability affects the channel gating. We also tested chimeric channels harbouring the stable coiled-coil from GCN4, a yeast leucine zipper type transcription factor protein20. The thermosensitivity relationship of a GCN4 chimera with a six amino-acid linker (designated 'relax') showed the ΔC phenotype, while that of a GCN4 chimera without intervening linker sequence showed the WT phenotype (Fig. 4b). To verify that these mutant channels were expressed as dimers, crosslinking assay with western blotting was performed (Fig. 4d). All mutants and chimeras exhibited clear band shifts to a region corresponding to the molecular mass of dimer (Fig. 4d).
It is reported that the cytoplasmic end of S4 helix is close to each other within a dimer, where Cys introduced into the position of Thr222 in hHv1/VSOP make a disulfide bond between two monomers9. To examine whether this spatial proximity was disarranged by the GGG mutation, we performed crosslinking experiments by oxidation with the T218C mHv1/VSOP mutants that corresponds toT222C in hHv1/VSOP. Both of the T218C and the 'GGG+T218C' mutants maintained the phenotypes in function regardless of the oxidation (Fig. 5b,c). They produced substantial amount of dimeric fractions by disulfide bondings (Fig. 5d), suggesting that the GGG mutation, which alters the functional phenotype, maintains a spatial proximity of two S4 helixes in the cytoplasmic end. We found that S215, three-residue upstream of T218 (Fig. 5a), is another closely opposite site that can be crosslinked by oxidation when it is replaced by Cys. S215C mutant also showed similar results as shown in the 'GGG+T218C' mutant (Fig. 5b and d). Almost no disulfide bonding was observed in the 'ΔC+T218C' channel (Fig. 5d), because this channel lacks coiled-coil domain that is indispensable for dimerization (Fig. 1b). Taken together, these results indicate that the close positioning of two channel subunits, bound by the coiled-coil domain, is not enough to acquire the thermal stability of the channel gating, but the linker stability between the coiled-coil domain and the transmembrane region is required.
The gating cooperativity dependent on the linker structure
It has been proposed that the gating movement of one monomeric channel subunit affects the gating of the other subunit within the dimeric unit16,17,18. We observed, in this study, dimerization by the coiled-coil assembly affected the thermosensitive gating. To understand the roles of coiled-coil in the cooperative gating and to know the relationship to the thermosensitive gating, we next analysed the gating cooperativity of channels with mutation in the linker, the GGG mutant and the AAA mutant.
We used limiting slope analysis to estimate the effective gating charge in WT and the mutant channels, where the only small amplitude of the H+ current is used for analysis with avoiding H+ accumulation effects, because the Hv channel gating is sensitive to pH (ref. 32). Whole-cell currents were recorded by slow ramp pulse protocols, and reversal potentials, before and after the ramp pulse, were analysed (Fig. 6a). Under these conditions, we confirmed that the reversal potentials were not changed after the ramp pulse (Fig. 6b), and we calculated the chord conductance using the reversal potentials. The value of the effective gating charge (Zδ) in the WT channel was 4.1±0.2 (n=6), and it was decreased to 2.0±0.03 (n=5) on deletion of the coiled-coil domain (Fig. 6c,d). This twofold Zδ value of the WT channel comparing with the monomeric ΔC channel suggests that two channel subunits gate in a cooperative manner. Introduction of the GGG mutation into the linker segment decreased Zδ to half (2.2±0.03, n=5), whereas the AAA mutation did not affect the Zδ value (4.1±0.1, n=6). Crosslinking assays showed that these two channels express as dimeric channels (Fig. 4d). This indicates that dimerization is necessary but not sufficient to establish the gating cooperativity. The stable linker structure is also required for cooperative gating. Cooperative gating of the GGG mutant and the AAA mutant paralleled the result of thermosensitive activation gating (Figs 4b and 6). Zδ values of the channels with mutation in the coiled-coil domain were also analysed. 4R mutation decreased Zδ (2.5±0.1, n=6), whereas the NIN mutation showed an intact gating cooperativity (Zδ=4.2±0.09, n=8). The finding that the channel gating dependent on transmembrane voltage was affected both by the coiled-coil assembly and by the linker mutations suggests that the cytoplasmic coiled-coil domain has mechanical interactions with the transmembrane domain through the linker region.
Secondary structure analysis of the linker segment
To understand the mechanism of the gating regulation by the coiled-coil assembly, the structure information of the linker segment is required. To gain insight into the structure of the linker segment, we expressed and purified the coiled-coil regions, harbouring the linker peptides, and analysed their helix contents by CD spectrum. Measurements of all the coiled-coils CD spectrum revealed minima at 208 and 222 nm (Fig. 7a), enabling estimation of the helix contents from the CD spectrum (Fig. 7b)33. The helix content of the mHv1/VSOP-cc harbouring the original linker peptides (WT-linker) was 86.0%, suggesting that the linker peptides form α-helix. The GGG mutation into the linker decreased the helix content, whereas the AAA mutation retained the high helicity. This suggests that the linker peptide constructs continuous α-helix from the coiled-coil to the transmembrane S4, supporting that the cooperative gating between two subunits is mediated through the coiled-coil assembly. Thermal stabilities of the coiled-coil proteins harbouring the linker peptides are not changed by the mutation (Fig. 7c), suggesting that a difference in the temperature-dependent activation between AAA and GGG mutants is caused by the structural difference of the linker region.
Discussion
To know the relationships between channel assembly and the function in Hv1/VSOP, we took a multidisciplinary approach, utilizing CD spectroscopy, electrophysiology and X-ray crystallography. We found that the cytoplasmic coiled-coil has key roles both in dimer assembly and gating.
Ion channel subunits assemble as multimers to attain adequate functionality. Voltage-gated K+ channel subunits assemble into a tetramer to compose the pore in the centre and to attain steep voltage dependence30,34. Moreover, the assembly of different combinations of pore-forming subunits yields a family of heteromultimeric channels exhibiting functional diversity25,35,36. In the case of the Hv channel, the dimeric coiled-coil assembly regulates the channel activation kinetics in a temperature-dependent manner, such that depolarization-induced increases in H+ conductance seems to be optimized in the range of body temperature (cf. WT and ΔC in Fig. 2a,b). In fact, a Hv channel exhibiting high temperature dependence37,38 is expressed in phagocytes and lymphocytes and contributes to immunological events such as phagocytosis and the antibody production that occur under conditions of local and whole-body fever3,4,5,6. The temperature-dependent activation of mHv1/VSOP showed two key features in our study: the temperature dependences for activation (slopes of the channel gating) with the coiled-coil domain deleted (Fig. 2b) and mutated (Fig. 3b) are virtually identical to those of WT channels; and the temperature dependence of the unfolding of the coiled-coil domain is much steeper (Fig. 3d) and occurs over a different temperature range than the temperature-sensitive gating of the channel (Fig. 3b). These results imply that the coiled-coil domain does not determine the slope of temperature dependence and that the difference in the activation rate over a range of temperatures is simply due to a difference in the energy of activation. In other words, the higher energetic impact (the higher temperature) is required because of the restriction by the coiled-coil assembly for transition to the channel open state. This was also ascertained in the analysis of the effective charge movement (Fig. 6): the twice valence of the Zδ was observed in WT channel by comparison with ΔC channel. The 4R mutation, which suppressed the coiled-coil assembly and destabilized the thermostability of the gating, reduced Zδ (Fig. 6c,d). The results of the effective charge from the GGG/AAA linker mutant channels also well-matched to those in the analysis on the temperature-dependent activation (Figs 4 and 6), suggesting that the modulation of the temperature-dependent activation by the coiled-coil assembly lies in the same biophysical principle to the cooperative gating of the channel. Thus, the gating cooperativity of the mHv1/VSOP channel depends on the structural base consisting of the coiled-coil domain and the linker domain, and the coiled-coil assembly adjusts the range of temperature by elevating the energy of activation for the channel opening. Effect of the pre-heating at high temperature on activation kinetics was reversible (Supplementary Fig. S3c), and this seems inconsistent with the results of the CD spectrum (Fig. 3d). However, this is most likely caused by the difference of physical condition of the coiled-coil; that is, the coiled-coil domain below the close unit of two transmembrane domains may acquire a reversible dissociation, whereas the purified protein hardly finds assembly partner in solution. Live monitoring of the coiled-coil domain behaviour during the channel gating, by some techniques, will merit further research.
Schematic illustrations of gating in the WT and the mutant channels are summarized (Fig. 8a-c). The stabilizing regulation of the temperature-dependent activation by the coiled-coil was observed in the WT channel (Fig. 8a, red arrow), while it conversely disappeared and the temperature threshold of the activation kinetics was set lower in the 4R and GGG channels (Fig. 8b,c, red broken arrow). The gating cooperativity was also reduced in the 4R and GGG mutation . These are caused by the unstable dimerization of the 4R coiled-coil and by the loose connection via the GGG linker (Fig. 8b,c). Phenotypes of the AAA channel in the temperature-dependent activation and the cooperative gating were the same to those of the WT channel. The ΔC channel does not have a coiled-coil domain and the gating partner, and therefore regulation of the temperature dependent activation was destabilized and the cooperative gating disappeared. Thus, rigid structure of the linker region enables to mediate the stability of the coiled-coil to the transmembrane domain, and to mediate the cooperative gating within the dimer. Considering the mechanical interaction between two channel subunits, a certain level of physical intersubunit contact between transmembrane regions within a dimer has been reported9,17. These make it plausible that two transmembrane regions in close proximity in a dimer physically interact with one another, and the coiled-coil domain facilitates the close positioning of the two transmembrane regions (Supplementary Fig. S7a). However, this idea is inconsistent with our finding that GGG mutation at the linker region eliminated the WT gating phenotype, but retained the dimeric assembly (Fig. 4b,d). The phenotypes of GGG mutant were unchanged in the condition in which the cytoplasmic ends of two S4 helixes were crosslinked by disulfide bonding (Fig. 5). Our results provide an alternative model in which cooperative gating of the two channel units is mediated by mechanical interaction via the cytoplasmic coiled-coil (Supplementary Fig. S7b). The linker structure is α-helix from the results with the CD spectrometry (Fig. 7), suggesting that the force transmission takes place along a continuous α-helix consisting of the S4 and the coiled-coil strands (Fig. 8a; Supplementary Fig. S7b). The coiled-coil structure is thus a suitable cytoplasmic domain that accomplishes both subunit assembly and gating modulation.
The coiled-coil design of the Hv channel is unique in that a hydrophilic residue, N231, is present within the hydrophobic core alignment. As seen in the flipped geometry of the side chains in comparison with the hHv1/VSOP coiled-coil19 (Fig. 1c), N231 could contribute to increase flexibility of the coiled-coil. NIN mutation increased the thermostability—that is, the fold was reversible after melting (Fig. 3d). Correspondingly, the higher temperature was required to evoke an activation of the NIN mutant channel (Fig. 3b). This seemingly unusual hydrophilic N231 core, conserved among all species of Hv channel (Fig. 1a), may be installed among the hydrophobic residues to adjust the stability or generate mobility within the coiled-coil domain during channel gating, enabling proper regulation of channel activation (Fig. 3a,b).
Findings derived from the study of Hv channels, a minimal voltage-gated channel, may offer principles common to other larger and more complex ion channels; force transmission between the cytoplasmic domain and the gate within the transmembrane region may also occur in other ion channels in which gating modulators interact with a region adjacent to the transmembrane gate39,40,41,42,43.
Methods
Cloning and the construction design
We used a mouse Hv channel clone (mHv1/VSOP)1 for all experiments in this study. In the experiments of protein biochemistry (Figs 1c and 7), DNA corresponding to the mHv1/VSOP coiled-coil domain (residues 220–269) was amplified by PCR and ligated into a pET28 (Novagen)-derived vector, pET28HMT44, kindly given by Dr Daniel L. Minor Jr (UCSF, USA). In the experiments of electrophysiology (Figs 2,3,4,5,6), the complementary DNAs for WT and mutant mHv1/VSOP channels were subcloned into the pIRES-EGFP expression vector (Clontech). In the recordings of the concatenated channel, two subunits were linked with a flexible 19-amino-acid linker, GGSGGSGGSGSGGSGGSGG, as a tandem channel (Fig. 4a). In the crosslinking assay by disulfide-bond, the double-point mutant of mHv1/VSOP, C103S and C245S, was used as a template, where two native Cys residues were mutated to prevent intrinsic disulfide bondings (Fig. 5). The constructs used are summarized in Supplementary Fig. S9.
Crosslinking assay
HEK293T cells were used as the expression host for mHv1/VSOP WT and mutant channels. In the amine-reactive crosslinking (Figs 1b and 4d), cells were treated by DSS and the reaction was quenched with 100 mM Tris HCl (pH 8.0). In the crosslinking analyses by disulfide bond (Fig. 5d), cells were lysed with 1% dodecyl maltoside, and, then, the protein solution was oxidized by Cu–P (mixture of 330 μM CuSO4 and 1 mM O-phenanthroline) for 20 min. The Cu–P reaction was quenched with 5 mM N-ethylmaleimide and 50 mM EDTA. Proteins were separated on 12.5% SDS–PAGE under reducing conditions and electrophoretically transferred to Immobilon-P (Millipore). A polyclonal rabbit anti-mHv1/VSOP antibody generated against the amino acids Met1-Ala72 in the N terminus of mHv1/VSOP was used for detection45. Horseradish peroxidase-conjugated donkey anti-rabbit IgG (Amersham Pharmacia) was used as the secondary antibody.
Protein expression and purification
Proteins were expressed in Escherichia coli. (BL21(DE3)pLysS) grown in 2YT media at 37 °C and induced with 0.4 mM isopropyl-β-D-thiogalactoside for 4 h. Cells were harvested by centrifugation, and cell pellets were lysed by sonication in lysis buffer (10 mM K2HPO4 pH 7.3, 250 mM KCl, 1 mM EDTA, 5 mM β-ME, 1 mM PMSF). The soluble fraction, which contained the hexahistidine-maltose-binding protein tag, was applied to a 20-ml HisPrep FF (GE Healthcare) nickel-charged column, and eluted by 500 mM imidazole on an ÄKTA-purifier system (GE Healthcare). The proteins were then applied to a 75-ml amylose (New England Biolabs) column, and eluted by 10 mM maltose, after which the maltose was removed on a 53-ml HiPrep desalting column (GE Healthcare). The affinity tag was then cleaved with TEV protease46 (~300 μM for 24 h, at 4 °C). Coiled-coil proteins were collected in the flow-through from the Hisprep nickel column, and were further purified by Superdex75 gel-filtration column (GE Healthcare). The protein concentration was determined by absorbance (BCA Protein Assay Kit, Pierce), and the solution of purified mHv1/VSOP coiled-coil protein (mHv1/VSOP-cc) was used for the crystallization step.
Crystallography
mHv1/VSOP-cc crystals were obtained at 10 °C using hanging-drop vapour diffusion. The crystals grew from mixtures of 1 μl of protein solution (5 mg ml−1 protein dissolved in 150 mM KCl, 5 mM Hepes (pH 7.3)) and 1 μl of reservoir solution containing 2% v/v Tacsimate (pH 7.0), 0.1 M imidazole (pH 7.0), 8% w/v PEG3350, and 5% v/v 2-Propanol (PEGRx-2 #26, Hampton) (Fig. 1c). Diffraction data were collected using 20% PEG200 cryoprotectant at BL44XU SPring-8 (Hyogo) equipped with a MX-225HE CCD detector (Rayonix). The mHv1/VSOP-cc crystals belonged to the P212121 space group and diffracted X-rays to 1.45 Å. Data were processed using HKL2000 (HKL Research). The primary structure was solved by molecular replacement with Phaser47 using a dimeric coiled-coil template (1D7M), and an initial structural model was built using the program Arp/Warp48. Model building was done in Coot49. A resultant model was refined using REFMAC5 (ref. 50 with the inclusion of TLS parameters throughout refinement (PDB accession code 3VMX) (Supplementary Table S1). The structural comparison between mHv1/VSOP coiled-coil (222–262) and hHv1/VSOP coiled-coil (226–266; PDB accession code 3A2A) was carried out using lsqkab in CCP4 suite, and the r.m.s. deviation calculated was obtained.
CD spectroscopy
Protein solution, composed of 50-μM purified mHv1/VSOP coiled-coil protein in buffer containing 150 mM KCl, 1 mM DTT and 10 mM K2HPO4 (pH 7.3), was analysed using an J-715 spectropolarimeter (JASCO) equipped with a peltier device. The protein concentration was adjusted by absorbance using a measuring template, the protein construct harbouring Trp for the sedimentation analysis, whose concentration was determined by absorbance at 280 nm (refs 51,52). The protein constructs analysed were summarized (Supplementary Fig. S9f). Wavelength scans from 260 to 190 nm were taken at 4 °C, using a 1-mm path length cuvette. Thermal stability was assessed by monitoring [θ]222 every 0.2 °C from 4 to 85 °C, using a 1-°C min−1 temperature gradient. Molar ellipticity per residue of the buffer-subtracted CD spectrum was calculated as a function of concentration, path length, and number of residues per monomer:
where [θ]MRD is the molar ellipticity per residue in deg·cm2 (dmol·res)−1, θ is the experimental ellipticity in millidegrees, M is the molecular mass of the protein, c is the protein concentration in μM, l is the cuvette path length in mm, and NR is the number of residues in the protein. The per cent helicity was estimated by:
where [θ]222 is the experimental molar ellipticity per residue at 222 nm, is the molar ellipticity for a helix of infinite length at 222 nm (that is, 39,500 deg·cm2 dmol−1), i is the number of helices, κ is a wavelength-specific constant with a value of 2.57 at 222 nm, and N is the number of residues in the protein33.
Electrophysiology
The cDNAs for WT and mutant mHv1/VSOP channels were transfected into HEK293T cells. The cells were then cultured for 24 h in DMEM supplemented with 10% bovine calf serum. Electrophysiological recordings were carried out 4–16 h after reseeding, which corresponds to 18–30 h after transfection. A coverslip with HEK293T cells was placed in a recording chamber containing bath solution (see below) on the stage of an inverted fluorescence microscope (IX71, Olympus), and the transfected cells were identified by the fluorescent signal from the green fluorescent protein. Macroscopic currents were then recorded in the whole-cell clamp configuration using an Axopatch-200B amplifier (Molecular Devices). The pipette resistance in the solution was 3–5 MΩ. Sixty-to-eighty per cent of the voltage error due to the series resistance was compensated by a circuit in the amplifier. The recorded currents were low-pass filtered at 1 kHz using a 4-pole Bessel filter circuit built into the amplifier. The external solution contained 75 mM N-methyl-D-glucamine (NMDG), 1 mM CaCl2, 1 mM MgCl2, 10 mM glucose, and 180 mM Hepes (pH 7.0). The pipette solution contained 65 mM NMDG, 3 mM MgCl2, 1 mM EGTA, and 183 mM Hepes (pH 7.0). For analysing the effective gating charge (Fig. 6), the pipette solution contained 75 mM NMDG, 1 mM MgCl2, 1 mM EGTA, 70 mM glucose, and 110 mM MES (pH 6.0). The recording temperature was controlled (15–45 °C) by adding heated or cold external solution to the external solution. Data were analysed using Clampfit (Axon Instruments) and Igor Pro (WaveMetrics) software. The activation time constant shown in Figs 2,3,4,5 and Supplementary Figs S3–S4 was obtained by fitting the activation phase of the outward currents on depolarization at 100 mV from the onset of the step pulse to the pulse end. Various lengths of pulse time, 500 ms, 625 ms, 1, 1.25, 1.5, 2, 3 and 5 s were used to fit the activation phases properly by single exponential function, and an inverse logarithm (Log(1/τ)) of the activation time constant (τ) was calculated and plotted versus temperature (Figs 2,3,4,5 and Supplementary Figs S3-S4).
Size-exclusion chromatography
For the isolated HMT-tagged mHv1/VSOP coiled-coil, 100 μl of 500 μM protein in buffer containing 250 mM KCl, 10 mM Tris (pH 7.3) were passed through a Superdex200 HR 10/30 column (GE Healthcare) equilibrated with the same buffer on an ÄKTA-purifier system (GE Healthcare) at 4 °C (refs 25,53). Elutes were monitored at 280 nm over a flow rate of 0.5 ml min−1. Each column was calibrated using six standard protein molecular mass markers (Supplementary Fig. S8). Elution volumes from three runs were averaged. In the statistical analysis, mean±s.e.m. was indicated unless otherwise noted.
Equilibrium sedimentation
Equilibrium sedimentation experiments were performed at 4 °C in a Beckman Optima XL-A analytical ultracentrifuge (Beckman Coulter) (Supplementary Fig. S1a). The mHv1/VSOP-cc-GGWS was dissolved to a concentration of 40 μM in 150 mM KCl, 1 mM DTT, 10 mM K2HPO4 (pH 7.3), and the equilibrium distribution was measured based on the absorbance at 275 nm as a function of the radial distance at 25,000 r.p.m., at 4 °C. The molecular mass and residuals were calculated, as described previously25,54.
Additional information
Accession codes: The structure coordinates for the mHv1/VSOP coiled-coil have been deposited in the Protein Data Bank under code 3VMX.
How to cite this article: Fujiwara Y. et al. The cytoplasmic coiled-coil mediates cooperative gating temperature sensitivity in the voltage-gated H+ channel Hv1. Nat. Commun. 3:816 doi: 10.1038/ncomms1823 (2012).
References
Sasaki, M., Takagi, M. & Okamura, Y. A voltage sensor-domain protein is a voltage-gated proton channel. Science 312, 589–592 (2006).
Ramsey, I. S., Moran, M. M., Chong, J. A. & Clapham, D. E. A voltage-gated proton-selective channel lacking the pore domain. Nature 440, 1213–1216 (2006).
Ramsey, I. S., Ruchti, E., Kaczmarek, J. S. & Clapham, D. E. Hv1 proton channels are required for high-level NADPH oxidase-dependent superoxide production during the phagocyte respiratory burst. Proc. Natl Acad. Sci. USA 106, 7642–7647 (2009).
Morgan, D. et al. Voltage-gated proton channels maintain pH in human neutrophils during phagocytosis. Proc. Natl Acad. Sci. USA 106, 18022–18027 (2009).
Okochi, Y., Sasaki, M., Iwasaki, H. & Okamura, Y. Voltage-gated proton channel is expressed on phagosomes. Biochem. Biophys. Res. Commun. 382, 274–279 (2009).
Capasso, M. et al. HVCN1 modulates BCR signal strength via regulation of BCR-dependent generation of reactive oxygen species. Nat. Immunol. 11, 265–272 (2010).
Lee, S. Y., Letts, J. A. & MacKinnon, R. Functional reconstitution of purified human Hv1 H+ channels. J. Mol. Biol. 387, 1055–1060 (2009).
Tombola, F., Ulbrich, M. H. & Isacoff, E. Y. The voltage-gated proton channel Hv1 has two pores, each controlled by one voltage sensor. Neuron 58, 546–556 (2008).
Lee, S. Y., Letts, J. A. & Mackinnon, R. Dimeric subunit stoichiometry of the human voltage-dependent proton channel Hv1. Proc. Natl Acad. Sci. USA 105, 7692–7695 (2008).
Koch, H. P. et al. Multimeric nature of voltage-gated proton channels. Proc. Natl Acad. Sci. USA 105, 9111–9116 (2008).
MacKinnon, R. Determination of the subunit stoichiometry of a voltage-activated potassium channel. Nature 350, 232–235 (1991).
Kreusch, A., Pfaffinger, P. J., Stevens, C. F. & Choe, S. Crystal structure of the tetramerization domain of the Shaker potassium channel. Nature 392, 945–948 (1998).
Minor, D. L. et al. The polar T1 interface is linked to conformational changes that open the voltage-gated potassium channel. Cell 102, 657–670 (2000).
Doyle, D. A. et al. The structure of the potassium channel: molecular basis of K+ conduction and selectivity. Science 280, 69–77 (1998).
Long, S. B., Campbell, E. B. & Mackinnon, R. Crystal structure of a mammalian voltage-dependent Shaker family K+ channel. Science 309, 897–903 (2005).
Gonzalez, C., Koch, H. P., Drum, B. M. & Larsson, H. P. Strong cooperativity between subunits in voltage-gated proton channels. Nat. Struct. Mol. Biol. 17, 51–56 (2010).
Musset, B. et al. Zinc inhibition of monomeric and dimeric proton channels suggests cooperative gating. J. Physiol. 588, 1435–1449 (2010).
Tombola, F., Ulbrich, M. H., Kohout, S. C. & Isacoff, E. Y. The opening of the two pores of the Hv1 voltage-gated proton channel is tuned by cooperativity. Nat. Struct. Mol. Biol. 17, 44–50 (2010).
Li, S. J. et al. The role and structure of the carboxyl-terminal domain of the human voltage-gated proton channel Hv1. J. Biol. Chem. 285, 12047–12054 (2010).
Harbury, P. B., Zhang, T., Kim, P. S. & Alber, T. A switch between two-, three-, and four-stranded coiled coils in GCN4 leucine zipper mutants. Science 262, 1401–1407 (1993).
Lumb, K. J. & Kim, P. S. A buried polar interaction imparts structural uniqueness in a designed heterodimeric coiled coil. Biochemistry 34, 8642–8648 (1995).
Akey, D. L., Malashkevich, V. N. & Kim, P. S. Buried polar residues in coiled-coil interfaces. Biochemistry 40, 6352–6360 (2001).
Acharya, A., Rishi, V. & Vinson, C. Stability of 100 homo and heterotypic coiled-coil a-a′ pairs for ten amino acids (A, L, I, V, N, K, S, T, E, and R). Biochemistry 45, 11324–11332 (2006).
Acharya, A., Ruvinov, S. B., Gal, J., Moll, J. R. & Vinson, C. A heterodimerizing leucine zipper coiled coil system for examining the specificity of a position interactions: amino acids I, V, L, N, A, and K. Biochemistry 41, 14122–14131 (2002).
Howard, R. J., Clark, K. A., Holton, J. M. & Minor, D. L. Jr Structural insight into KCNQ (Kv7) channel assembly and channelopathy. Neuron 53, 663–675 (2007).
Deng, Y. et al. Antiparallel four-stranded coiled coil specified by a 3-3-1 hydrophobic heptad repeat. Structure 14, 247–255 (2006).
Liu, J. et al. Conformational specificity of the lac repressor coiled-coil tetramerization domain. Biochemistry 46, 14951–14959 (2007).
Tsuruda, P. R., Julius, D. & Minor, D. L. Jr Coiled coils direct assembly of a cold-activated TRP channel. Neuron 51, 201–212 (2006).
Hoshino, M., Yumoto, N., Yoshikawa, S. & Goto, Y. Design and characterization of the anion-sensitive coiled-coil peptide. Protein Sci. 6, 1396–1404 (1997).
Bezanilla, F. The voltage sensor in voltage-dependent ion channels. Physiol. Rev. 80, 555–592 (2000).
Horn, R. Coupled movements in voltage-gated ion channels. J. Gen. Physiol. 120, 449–453 (2002).
Decoursey, T. E. Voltage-gated proton channels and other proton transfer pathways. Physiol. Rev. 83, 475–579 (2003).
Chen, Y. H., Yang, J. T. & Chau, K. H. Determination of the helix and beta form of proteins in aqueous solution by circular dichroism. Biochemistry 13, 3350–3359 (1974).
Sigworth, F. J. Structural biology: Life's transistors. Nature 423, 21–22 (2003).
Nakajo, K. & Kubo, Y. Second coiled-coil domain of KCNQ channel controls current expression and subfamily specific heteromultimerization by salt bridge networks. J. Physiol. 586, 2827–2840 (2008).
Isacoff, E. Y., Jan, Y. N. & Jan, L. Y. Evidence for the formation of heteromultimeric potassium channels in Xenopus oocytes. Nature 345, 530–534 (1990).
DeCoursey, T. E. & Cherny, V. V. Temperature dependence of voltage-gated H+ currents in human neutrophils, rat alveolar epithelial cells, and mammalian phagocytes. J. Gen. Physiol. 112, 503–522 (1998).
Kuno, M., Kawawaki, J. & Nakamura, F. A highly temperature-sensitive proton current in mouse bone marrow-derived mast cells. J. Gen. Physiol. 109, 731–740 (1997).
De Waard, M. et al. Direct binding of G-protein betagamma complex to voltage-dependent calcium channels. Nature 385, 446–450 (1997).
Zamponi, G. W., Bourinet, E., Nelson, D., Nargeot, J. & Snutch, T. P. Crosstalk between G proteins and protein kinase C mediated by the calcium channel alpha1 subunit. Nature 385, 442–446 (1997).
Lee, U. S. & Cui, J. BK channel activation: structural and functional insights. Trends Neurosci. 33, 415–423 (2010).
Findeisen, F. & Minor, D. L. Jr Disruption of the IS6-AID linker affects voltage-gated calcium channel inactivation and facilitation. J. Gen. Physiol. 133, 327–343 (2009).
Fujiwara, Y. & Kubo, Y. Regulation of the desensitization and ion selectivity of ATP-gated P2X2 channels by phosphoinositides. J. Physiol. 576, 135–149 (2006).
Van Petegem, F., Clark, K. A., Chatelain, F. C. & Minor, D. L. Jr Structure of a complex between a voltage-gated calcium channel beta-subunit and an alpha-subunit domain. Nature 429, 671–675 (2004).
Sakata, S. et al. Functionality of the voltage-gated proton channel truncated in S4. Proc. Natl Acad. Sci. USA 107, 2313–2318 (2010).
Kapust, R. B. et al. Tobacco etch virus protease: mechanism of autolysis and rational design of stable mutants with wild-type catalytic proficiency. Protein Eng. 14, 993–1000 (2001).
Storoni, L. C., McCoy, A. J. & Read, R. J. Likelihood-enhanced fast rotation functions. Acta Crystallogr. D Biol. Crystallogr. 60, 432–438 (2004).
Perrakis, A., Morris, R. & Lamzin, V. S. Automated protein model building combined with iterative structure refinement. Nat. Struct. Biol. 6, 458–463 (1999).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D Biol. Crystallogr. 66, 486–501 (2010).
Murshudov, G. N., Vagin, A. A. & Dodson, E. J. Refinement of macromolecular structures by the maximum-likelihood method. Acta Crystallogr. D Biol. Crystallogr. 53, 240–255 (1997).
Caswell, D. S. & Spiro, T. G. Tyrosine and tryptophan modification monitored by ultraviolet resonance Raman spectroscopy. Biochim. Biophys. Acta 873, 73–78 (1986).
Edelhoch, H. Spectroscopic determination of tryptophan and tyrosine in proteins. Biochemistry 6, 1948–1954 (1967).
Fujiwara, Y. & Minor, D. L. Jr X-ray crystal structure of a TRPM assembly domain reveals an antiparallel four-stranded coiled-coil. J. Mol. Biol. 383, 854–870 (2008).
Laue, T. M. Sedimentation equilibrium as thermodynamic tool. Methods Enzymol. 259, 427–452 (1995).
Acknowledgements
We thank Drs. Y. Goto and Y.H. Lee (Osaka University, Osaka) for supporting us in the CD spectrum experiments, and Dr. E. Yamashita for data collection on SPring-8 (Hyogo). Diffraction data were collected at the Osaka University beamline BL44XU at SPring-8 equipped with MX225-HE, which is financially supported by Academia Sinica and National Synchrotron Radiation Research Center (Taiwan, China). We also thank Dr T. McCormack for his help, in particular by bioinformatics approaches, in studying the coiled-coil motif of Hv1/VSOP and Dr. J. Cui (Washington University St Louis) for critical reading of the manuscript. This work was supported by grants from the Grant-in-Aid for Scientific Research (Y.F., Ya.O., T.K. and Yo.O.), the Targeted Proteins Research Program (Ya.O. and A.N.) and the Human Frontier Science Program (Ya.O.).
Author information
Authors and Affiliations
Contributions
Y.F., Ya.O., T.K. and Yo.O. designed experiments. Y.F. performed electrophysiological experiments. T.K. performed crosslinking experiments. Y.F., M.K. and K.T. performed protein biochemical experiments and crystallization. Y.F., K.T. and A.N performed structure analyses. Y.F., A.N. and Ya.O. wrote the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures S1-S9 and Supplementary Table S1 (PDF 6086 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/
About this article
Cite this article
Fujiwara, Y., Kurokawa, T., Takeshita, K. et al. The cytoplasmic coiled-coil mediates cooperative gating temperature sensitivity in the voltage-gated H+ channel Hv1. Nat Commun 3, 816 (2012). https://doi.org/10.1038/ncomms1823
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms1823
This article is cited by
-
Voltage sensors of a Na+ channel dissociate from the pore domain and form inter-channel dimers in the resting state
Nature Communications (2023)
-
Mechanosensitive aquaporins
Biophysical Reviews (2023)
-
Role of the Voltage-Gated Proton Channel Hv1 in Nervous Systems
Neuroscience Bulletin (2023)
-
Voltage-gated proton channels from fungi highlight role of peripheral regions in channel activation
Communications Biology (2021)
-
Proton pump inhibitors have pH-dependent effects on the thermostability of the carboxyl-terminal domain of voltage-gated proton channel Hv1
European Biophysics Journal (2018)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.