Abstract
Self-assembled quantum dots (QDs) are prominent candidates for solid-state quantum information processing. For these systems, great progress has been made in addressing spin states by optical means. In this study, we introduce an all-electrical measurement technique to prepare and detect non-equilibrium many-particle spin states in an ensemble of self-assembled QDs at liquid helium temperature. The excitation spectra of the one- (QD hydrogen), two- (QD helium) and three- (QD lithium) electron configuration are shown and compared with calculations using the exact diagonalization method. An exchange splitting of 10 meV between the excited triplet and singlet spin states is observed in the QD helium spectrum. These experiments are a starting point for an all-electrical control of electron spin states in self-assembled QDs above liquid helium temperature.
Similar content being viewed by others
Introduction
Epitaxial semiconductor quantum dots (QDs) are nanoscale objects, which incorporate fully confined carriers and are therefore perfectly suited for fundamental studies on atom-like objects in a solid-state environment1,2. In addition, these structures are promising building blocks for future quantum information processing3,4. These visionary applications require a controlled preparation of non-equilibrium states with well-defined charge and spin degrees of freedom. For self-assembled QDs, great progress has been made in this field using optical excitation and detection methods5,6,7,8,9,10,11. Optical techniques, however, may be difficult to implement in highly integrated (classical or quantum) computer technologies. An all-electrical preparation and time-resolved detection of non-equilibrium QD states are therefore highly desirable, but have so far only been achieved in lithographically defined QDs12,13,14,15 at very low temperatures (mK).
In this study, we use a novel all-electrical measurement technique to prepare and detect the ground and excited many-particle spin states in self-assembled InAs QDs at liquid helium temperature. This way, the pure electron spectra of QD hydrogen, helium and lithium are resolved. Comparison with detailed many-particle calculations enables us to identify the different charge and spin configurations in the spectra and in particular to detect the singlet and triplet states of QD helium. Furthermore, the possibility for time-resolved measurements is demonstrated and the evolution from non-equilibrium to equilibrium occupation is investigated. This constitutes an important step towards electrical quantum operations in self-assembled QDs.
Results
Time-resolved conductance spectroscopy
The investigated sample consists of an inverted high electron mobility transistor (HEMT) with an embedded ensemble of self-assembled InAs QDs1,16,5; see Figure 1a and the Methods section for details. As the electron channel, which supplies the carriers for the QDs, we employ a two-dimensional electron gas (2DEG)17. The tunnelling barrier between the 2DEG and QDs was chosen so that the tunnelling time is in the range of a few milliseconds. When a voltage pulse is applied to the gate, the carrier density and thus the conductivity of the 2DEG will change with a short RC time constant tRC=300 μs. At the same time, the energy levels of the dots, embedded in the dielectric of the HEMT, will shift1 and electrons will start to tunnel between the 2DEG and the dots. This increase in the number of electrons per dots will lead to a time-dependent decrease of the carrier density in the 2DEG18, which can be monitored with a high resolution by recording its conductivity. Thus, applying a constant voltage across the source and drain of the HEMT and recording the current transient ISD(t) will give a direct measure of the time-dependent tunnelling into the dots19. Because the response time of the 2DEG to an applied gate voltage pulse is much shorter than the typical tunnelling times, the present setup allows us to prepare non-equilibrium situations, in which the chemical potentials in the 2DEG and the dot layer differ greatly and tunnelling can take place over a wide range of energies (see insets in Fig. 1b). As we will show in the following section, this makes it possible to investigate excited QD states, as in n−i−n tunnelling structures20,21, however, with adjustable, well-defined initial charge (zero, one or two electrons per dot).
Figure 1b shows the measurement procedure. First, a well-defined QD state is prepared by setting an initial bias Vini and giving the system enough time (0.1 s) to equilibrate. Then, the probe pulse Vp is applied and ISD is recorded as a function of time (Fig. 1c). For better signal-to-noise ratio, ISD(t) is averaged over 1,000 pulses. As mentioned above, ISD(t) is proportional to QQD. Therefore, in equilibrium (t→∞) its derivative with respect to the gate voltage dΔISD/dVp is proportional to the (quantum) capacitance of the layer system, which is given by the density of states in the QDs17. The non-equilibrium situation is more complex; however, model calculations (not shown here) and experiments by Vdovin et al.20 show that also in non-equilibrium, the derivative of the tunnelling current amplitude versus the gate voltage reflects the density of states. Therefore, by plotting dΔISD/dVp, the complete time evolution of the QD states can be obtained as the dots are filling up with electrons. Gate voltages Vp can be converted to energies using the well-established lever arm model ΔE=eΔVp/λ, where the lever arm λ=dgate/dQD=6 is given by the distance dQD between 2DEG and dots and the distance dgate between 2DEG and gate.
Time-evolution of the spectrum
Figure 2a displays a three-dimensional plot of dΔISD/dVp spectra for a transient time t between 0.5 ms and 10 ms. The initial bias is set to Vini=−0.9 V, so that the dots are completely empty before Vp is applied. The data demonstrates how the QD states in the ensemble evolves, as the dots are filled subsequently with up to six electrons.
Let us first consider the spectra for the shortest possible time delay t=0.5 ms≥tRC. In the present structure, the tunnelling times between the 2DEG and the dots are in the order of τs=6 ms and τp=1.4 ms for the s- and p-states, respectively18, so that at t=0.5 ms, to a good approximation, only tunnelling from the empty to the singly occupied dots is observed. As shown in Figure 2b, we observe three equidistant peaks in the signal, with a spacing of 52 meV, which is in good agreement with previous studies16. However, this measurement shows for the first time degenerate electron states without Coulomb interaction. The final state configuration of the tunnelling process is sketched above each peak: at Vp=−0.65 V, electrons resonantly tunnel into the lowest (s-) state of the dots; at Vp=−0.34 V, non-equilibrium tunnelling into the degenerate p-states takes place; and at around Vp=0.05 V, electrons are injected directly into the d-shell.
Figure 2c,d shows the spectra for intermediate delay times t≈τs,τp. Features from tunnelling into both equilibrium and non-equilibrium states can be observed. For example, the spectrum at t=3 ms exhibits peaks at both Vp=−0.53 V (more clearly seen in Fig. 2d) and −0.29 V. Comparison with theory (see below) allows us to identify these resonances as tunnelling into the ground and excited state of the doubly occupied dot (QD helium). Also, a new resonance at −0.4 V appears, which cannot be explained by an equilibrium or non-equilibrium state in the dots. From the fact that—compared with the lowest (s1) resonance—it exhibits a constant energy difference of about 41 meV and a constant amplitude, we conclude that this resonance is a phonon replica22 of the s1-state caused by efficient scattering of tunnelling electrons by inelastic LO phonons in the strained GaAs barrier23.
In the opposite limit, tτs,τp, the amplitude ΔISD(Vp, t→∞) corresponds to the total charge in the dots under equilibrium conditions, and the signal dΔISD/dVp will reflect the equilibrium, many-particle spectrum of the dots. For the longest time delay shown here (10 ms), we find two maxima around Vp=−0.6 V and a broad structure ranging from −0.24 V to +0.2 V. Comparison with the results from capacitance spectroscopy17 shows that the first two resonances are the two s-states of the QDs, which are separated by ≈20 meV because of Coulomb interaction. The broad structure is a signature of the four resonances of the p-shell (see arrows in Fig. 2e).
QD elements
Even though many features of equilibrium and non-equilibrium tunnelling can be identified in the time-resolved evolution shown in Figure 2, the fact that signals from dots with different occupations are superimposed makes a detailed interpretation of these data difficult. Therefore, in the following section, we will ensure a well-defined tunnelling process n−1→n by setting Vini so that n−1 electrons are present in the dots when the probe pulse is applied and that considering only the shortest possible time delay, so that higher-order tunnelling processes Δn=2 are strongly suppressed. The number of electrons in the final state determines which QD 'element' is being investigated: QD hydrogen, helium or lithium for n=1, 2 and 3, respectively.
QD hydrogen has already been discussed above (see Fig. 2b). Here, the spectroscopy of the equidistant excited energy levels with a spacing of ħω=52 meV provides valuable input for the theoretical treatment of the many-particle states. The spectrum of QD helium is shown in Figure 3a. We find a resonance at Vp=−0.53 V, which can be identified as tunnelling into the two-electron ground state (GS; s2), in agreement with equilibrium measurements18 and the results in Figure 2. Further resonances can be identified at Vp=−0.26 V and −0.2 V as well as a broad peak around Vp=+0.1 V. QD lithium is shown in Figure 3b, in which Vini=−0.44 V was chosen so that two electrons occupy the lowest (s) shell and the third electron can be injected either into the p- or the d-shell. One resonance is observed at −0.16 V and four further resonances between +0.06 V and +0.4 V.
Discussion
For a thorough identification of the different resonances, we have calculated the many-particle energy states in a 2D harmonic oscillator for n=1, 2 and 3 electrons using the exact diagonalization method, which provides numerically exact solutions24,25. This yields the many-particle states of the interacting electrons in terms of superpositions of single-particle Slater determinants. Their coefficients give the probability of single-particle configuration to be found. The level spacing ħω=52 meV was taken from the single-particle spectrum in Figure 2b. The effective mass and the dielectric constant were chosen to be m*=0.067m0 and ɛr=16, respectively, which go into the calculations by the single adjustable parameter16. In Figure 4, the calculated energies for the GS and the first few excited states are listed, together with the leading terms in the Slater determinant expansion (relative contributions given in %). Each level diagram represents an eigenstate to a total spin and total angular momentum including the corresponding Slater determinants with permuted orbital configuration. For each degenerate spin and angular momentum multiplet, only one representative is shown. Also shown are the experimental energies determined using the resonance condition for tunnelling En−En−1=eΔVp/λ and choosing the zero point of the energy scale such that the single-electron GS corresponds to E1GS=E(s1)=52 meV.
Through a comparison between theory and experiment, we can clearly identify the double-peak structure in Figure 3a (Vp=−0.26 V and −0.2 V) as tunnelling into the triplet and singlet spin states of excited QD helium. The energy difference of about 10 meV is a direct measure of the exchange interaction in self-assembled QDs, which has so far only been studied in self-assembled dots using optical spectroscopy9,5. The splitting is large enough to allow for the all-electrical preparation of spin-polarized states. At a measuring time of 0.5 ms, about half of the addressed dots will be occupied (see the amplitude of the transient in Fig. 1c). From a deconvolution of the double-peak structure, we can estimate that on the low-energy side of the resonance Vp=−0.31 V, about 99% of the those dots will be prepared in the triplet state.
The higher-lying resonances of QD helium are very closely spaced and therefore hardly discernible in the experiment. However, taking the calculations as a guide (see Fig. 4), they can be identified as tunnelling into different d-states of the dots; see also the comparison in Figure 4. It should be pointed out that two of the corresponding calculated final states have an equally strong contribution from empty s-shells (see Fig. 4, QD helium: third and sixth excited state). As the initial state is purely s-type, it is an interesting question how these contributions affect the tunnelling. However, to clarify the role of these contributions in the tunnelling process, a full calculation of the tunnelling dynamics, taking into account the Auger-type processes also would be necessary, which is beyond the scope of this work.
The spectrum for QD lithium consists of a clear maximum at −0.16 V and a broad shoulder around +0.2 V. From comparison with theory and near equilibrium measurements18, we conclude that the low-energy resonance is caused by tunnelling into the three-electron GS. The additional resonances at higher energies are clear signatures of tunnelling into excited QD lithium states. Comparison with the calculated values in Figure 4 suggests that the observed fine structure corresponds to the first four excited QD lithium states.
The measurement technique described here introduces the possibility to study time-resolved, non-equilibrium tunnelling phenomenon in self-assembled QD systems. This opens up a range of opportunities to investigate the structure and dynamics of excited states in these 'artificial atom-like' model systems. The observation of tunnelling into both singlet and triplet levels can be considered a first step towards an all-electrical manipulation and detection of spins in epitaxial QDs—a feat, which has so far only been possible in lithographically defined nanostructures14. Our findings also provide a link to the intriguing spin and interaction effects of self-assembled QDs, which have been identified using optical spectroscopy26.
In conclusion, we have introduced a transport spectroscopic method that enables us to prepare and detect the many-particle spin states in self-assembled QDs by all-electrical means. The method introduced here for preparation and readout of quantum states in self-assembled structures has very favourable scaling properties: because the resistance of a 2D readout channel is only given by its length-to-width ratio, good signal-to-noise ratio is expected even for scaling down to the single-dot level—a prerequisite for quantum information technologies. To achieve single-dot addressing, a lateral spatial constriction of the 2DEG may be realized by etching27 or by usage of split gates28. The random position of self-assembled QDs can be determined by atomic force microscopy, already demonstrated for positioning of a single QD inside a 2D photonic cavity29. To address many self-assembled QDs individually—a perquisite for quantum information processing—prepatterning techniques will have to be included to achieve a deterministic positioning of the dots30.
Methods
Sample growth
The sample is grown by solid-source molecular beam epitaxy on a GaAs(100) semi-insulating substrate. The active part of the structure starts with 150 nm Al0.34Ga0.66As, a Si-δ-doping, a 40 nm Al0.34Ga0.66 and a spacer with the 2DEG at the interface. What follows is a tunnelling barrier of 15 nm GaAs, 10 nm Al0.34Ga0.66. As and 5 nm GaAs. On top of the GaAs layer, the InAs QDs are grown, followed by another 40 nm GaAs and an insulating AlAs/GaAs superlattice. Finally, the structure is capped with 5 nm GaAs. The dot density of the sample is about 8.3×109 cm−2, determined by atomic force microscopic studies of similarly grown dots on the sample surface.
Experimental setup
The gated electron channel area is 5×103 μm2 which leads to about 4×105 probed QDs. Hall measurements yield a charge carrier density and a mobility of the 2DEG of about 7.4×1011 cm−2 and 9,340 cm2 per Vs, respectively. All measurements are performed in a He-cryostat at a temperature of 4.2 K, using a pulse generator at the gate contact and a current amplifier with a bandwidth of 1 MHz at the source contact. The drain contact is grounded and a bias of 30 mV is used at the current amplifier to measure the source-drain current ISD.
Additional information
How to cite this article: Marquardt, B. et al. Transport spectroscopy of non-equilibrium many-particle spin states in self-assembled quantum dots. Nat. Commun. 2:209 doi: 10.1038/1205 (2011).
References
Drexler, H., Leonard, D., Hansen, W., Kotthaus, J. P. & Petroff, P. M. Spectroscopy of quantum levels in charge-tunable InGaAs quantum dots. Phys. Rev. Lett. 73, 2252 (1994).
Petroff, P. M., Lorke, A. & Imamoglu, A. Epitaxially self-assembled quantum dots. Phys. Today 54, 46–52 (2001).
Loss, D. & DiVincenco, D. P. Quantum computation with quantum dots. Phys. Rev. A 57, 120–126 (1998).
Ladd, T. D. et al. Quantum computers. Nature 464, 45–53 (2010).
Warburton, R. J. et al. Optical emission from a charge-tunable quantum ring. Nature 405, 926–929 (2000).
Hawrylak, P., Narvaez, G., Bayer, M. & Forchel, A. Excitonic absorption in a quantum dot. Phys. Rev. Lett. 85, 389 (2000).
Jundt, G., Robledo, L., Hogele, A., Falt, S. & Imamoglu, A. Observation of dressed excitonic states in a single quantum dot. Phys. Rev. Lett. 100, 177401 (2008).
Gerardot, B. D. et al. Optical pumping of a single hole spin in a quantum dot. Nature 451, 441–444 (2008).
Köppen, T. et al. Resonant Raman transitions into singlet and triplet states in InGaAs quantum dots containing two electrons. Phys. Rev. Lett. 103, 037402 (2009).
Kroutvar, M. et al. Optically programmable electron spin memory using semiconductor quantum dots. Nature 432, 81–84 (2004).
Ediger, M. et al. Peculiar many-body effects revealed in the spectroscopy of highly charged quantum dots. Nat. Phys. 3, 774–779 (2007).
Fujisawa, T., Austing, D. G., Tokura, Y., Hirayama, Y. & Tarucha, S. Allowed and forbidden transitions in artificial hydrogen and helium atoms. Nature 419, 278–281 (2002).
Elzerman, J. et al. Single-shot read-out of an individual electron spin in a quantum dot. Nature 430, 431–435 (2004).
Hanson, R. et al. Single-shot readout of electron spin states in a quantum dot using spin-dependent tunnel rates. Phys. Rev. Lett. 94, 196802 (2005).
Gustavsson, S. et al. Counting statistics of single electron transport in a quantum dot. Phys. Rev. Lett. 96, 076605 (2006).
Warburton, R. J. et al. Coulomb interactions in small charge-tunable quantum dots: a simple model. Phys. Rev. B 58, 16221 (1998).
Russ, M., Meier, C., Lorke, A., Reuter, D. & Wieck, A. D. Role of quantum capacitance in coupled low-dimensional electron systems. Phys. Rev. B 73, 115334 (2006).
Marquardt, B., Geller, M., Lorke, A., Reuter, D. & Wieck, A. D. Using a two-dimensional electron gas to study nonequilibrium tunneling dynamics and charge storage in self-assembled quantum dots. Appl. Phys. Lett. 95, 022113 (2009).
Luyken, R. J. et al. The dynamics of tunneling into self-assembled InAs dots. Appl. Phys. Lett. 74, 2486 (1999).
Vdovin, E. E. et al. Imaging the electron wave function in self-assembled quantum dots. Science 290, 122–124 (2000).
Takahashi, S. et al. Large anisotropy of spin-orbit interaction in a single InAs self-assembled quantum dot. Phys. Rev. Lett. 104, 246801 (2010).
Rauch, C., Strasser, G., Unterrainer, K., Gornik, E. & Brill, B. Ballistic electron spectroscopy of vertical superlattice minibands. Appl. Phys. Lett. 70, 649 (1997).
Heitz, R. et al. Multiphonon-relaxation processes in self-organized InAs/GaAs quantum dots. Appl. Phys. Lett. 68, 361 (1996).
Pfannkuche, D., Gudmundsson, V. & Maksym, P. A. Comparison of a Hartree, a Hartree-Fock, and an exact treatment of quantum-dot helium. Phys. Rev. B 47, 2244 (1993).
Brocke, T. et al. Spectroscopy of few-electron collective excitations in charge-tunable artificial atoms. Phys. Rev. Lett. 91, 257401 (2003).
Greilich, A. et al. Mode locking of electron spin coherences in singly charged quantum dots. Science 313, 341–345 (2006).
Koike, K., Sasa, S., Inoue, M. & Yano, M. Electron transport in submicron-scale AlGaAs/GaAs field effect transistor with InAs nanodots as the floating gate. J. Vac. Sci. Technol. B 21, 710 (2003).
Horiguchi, N., Futatsugi, T., Nakata, Y. & Yokoyama, N. Electron transport properties through InAs self-assembled quantum dots in modulation doped structures. Appl. Phys. Lett. 70, 2294 (1997).
Hennessy, K. et al. Quantum nature of a strongly coupled single quantum dot-cavity system. Nature 445, 896–899 (2007).
Kiravittaya, S., Rastelli, A. & Schmidt, O. G. Advanced quantum dot configurations. Rep. Prog. Phys. 72, 046502 (2009).
Acknowledgements
We would like to thank Andreas Beckel for fruitful discussions. This project was supported by the DFG in the framework of the NanoSci-E+ project QD2D of the European Commission, CH265/4-1 and GRK 1286.
Author information
Authors and Affiliations
Contributions
B.M. prepared the sample and carried out the measurements. B.M., M.G. and A.L. analysed the data and wrote the manuscript. D.R. and A.D.W. grew the sample, B.B. and D.P. carried out the calculations. M.G. and A.L. devised the experiment and supervised the work.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/
About this article
Cite this article
Marquardt, B., Geller, M., Baxevanis, B. et al. Transport spectroscopy of non-equilibrium many-particle spin states in self-assembled quantum dots. Nat Commun 2, 209 (2011). https://doi.org/10.1038/ncomms1205
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms1205
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.